Browse Source

binutils: fix to compile with texinfo 5.2

Signed-off-by: Alejandro Mery <amery@geeks.cl>
stable/0.6
Alejandro Mery 10 years ago
parent
commit
a5e93b1262
  1. 279
      base/binutils/0002_binutils-texinfo-5.0-gas-doc.patch
  2. 108
      base/binutils/0003-binutils-texinfo-5.0.patch

279
base/binutils/0002_binutils-texinfo-5.0-gas-doc.patch

@ -0,0 +1,279 @@
# --- SDE-COPYRIGHT-NOTE-BEGIN ---
# This copyright note is auto-generated by ./scripts/Create-CopyPatch.
#
# Filename: package/.../binutils/0002_binutils-texinfo-5.0-gas-doc.patch
# Copyright (C) 2014 The OpenSDE Project
#
# More information can be found in the files COPYING and README.
#
# This patch file is dual-licensed. It is available under the license the
# patched project is licensed under, as long as it is an OpenSource license
# as defined at http://www.opensource.org/ (e.g. BSD, X11) or under the terms
# of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
# --- SDE-COPYRIGHT-NOTE-END ---
taken from https://raw.githubusercontent.com/jck/pkgbuilds/master/binutils-msp430/0002_binutils-texinfo-5.0-gas-doc.patch
diff --git c/gas/doc/c-arc.texi i/gas/doc/c-arc.texi
index 3a136a7..cd6f0d9 100644
--- c/gas/doc/c-arc.texi
+++ i/gas/doc/c-arc.texi
@@ -212,7 +212,7 @@ The extension instructions are not macros. The assembler creates
encodings for use of these instructions according to the specification
by the user. The parameters are:
-@table @bullet
+@table @code
@item @var{name}
Name of the extension instruction
diff --git c/gas/doc/c-arm.texi i/gas/doc/c-arm.texi
index d3cccf4..97c2f92 100644
--- c/gas/doc/c-arm.texi
+++ i/gas/doc/c-arm.texi
@@ -376,29 +376,29 @@ ARM and THUMB instructions had their own, separate syntaxes. The new,
@code{unified} syntax, which can be selected via the @code{.syntax}
directive, and has the following main features:
-@table @bullet
-@item
+@table @code
+@item 1
Immediate operands do not require a @code{#} prefix.
-@item
+@item 2
The @code{IT} instruction may appear, and if it does it is validated
against subsequent conditional affixes. In ARM mode it does not
generate machine code, in THUMB mode it does.
-@item
+@item 3
For ARM instructions the conditional affixes always appear at the end
of the instruction. For THUMB instructions conditional affixes can be
used, but only inside the scope of an @code{IT} instruction.
-@item
+@item 4
All of the instructions new to the V6T2 architecture (and later) are
available. (Only a few such instructions can be written in the
@code{divided} syntax).
-@item
+@item 5
The @code{.N} and @code{.W} suffixes are recognized and honored.
-@item
+@item 6
All instructions set the flags if and only if they have an @code{s}
affix.
@end table
@@ -433,28 +433,6 @@ Either @samp{#} or @samp{$} can be used to indicate immediate operands.
@cindex register names, ARM
*TODO* Explain about ARM register naming, and the predefined names.
-@node ARM-Neon-Alignment
-@subsection NEON Alignment Specifiers
-
-@cindex alignment for NEON instructions
-Some NEON load/store instructions allow an optional address
-alignment qualifier.
-The ARM documentation specifies that this is indicated by
-@samp{@@ @var{align}}. However GAS already interprets
-the @samp{@@} character as a "line comment" start,
-so @samp{: @var{align}} is used instead. For example:
-
-@smallexample
- vld1.8 @{q0@}, [r0, :128]
-@end smallexample
-
-@node ARM Floating Point
-@section Floating Point
-
-@cindex floating point, ARM (@sc{ieee})
-@cindex ARM floating point (@sc{ieee})
-The ARM family uses @sc{ieee} floating-point numbers.
-
@node ARM-Relocations
@subsection ARM relocation generation
@@ -497,6 +475,28 @@ respectively. For example to load the 32-bit address of foo into r0:
MOVT r0, #:upper16:foo
@end smallexample
+@node ARM-Neon-Alignment
+@subsection NEON Alignment Specifiers
+
+@cindex alignment for NEON instructions
+Some NEON load/store instructions allow an optional address
+alignment qualifier.
+The ARM documentation specifies that this is indicated by
+@samp{@@ @var{align}}. However GAS already interprets
+the @samp{@@} character as a "line comment" start,
+so @samp{: @var{align}} is used instead. For example:
+
+@smallexample
+ vld1.8 @{q0@}, [r0, :128]
+@end smallexample
+
+@node ARM Floating Point
+@section Floating Point
+
+@cindex floating point, ARM (@sc{ieee})
+@cindex ARM floating point (@sc{ieee})
+The ARM family uses @sc{ieee} floating-point numbers.
+
@node ARM Directives
@section ARM Machine Directives
diff --git c/gas/doc/c-cr16.texi i/gas/doc/c-cr16.texi
index b6cf10f..00ddae2 100644
--- c/gas/doc/c-cr16.texi
+++ i/gas/doc/c-cr16.texi
@@ -43,26 +43,33 @@ Operand expression type qualifier is an optional field in the instruction operan
CR16 target operand qualifiers and its size (in bits):
@table @samp
-@item Immediate Operand
-- s ---- 4 bits
-@item
-- m ---- 16 bits, for movb and movw instructions.
-@item
-- m ---- 20 bits, movd instructions.
-@item
-- l ---- 32 bits
-
-@item Absolute Operand
-- s ---- Illegal specifier for this operand.
-@item
-- m ---- 20 bits, movd instructions.
-
-@item Displacement Operand
-- s ---- 8 bits
-@item
-- m ---- 16 bits
-@item
-- l ---- 24 bits
+@item Immediate Operand: s
+4 bits.
+
+@item Immediate Operand: m
+16 bits, for movb and movw instructions.
+
+@item Immediate Operand: m
+20 bits, movd instructions.
+
+@item Immediate Operand: l
+32 bits.
+
+@item Absolute Operand: s
+Illegal specifier for this operand.
+
+@item Absolute Operand: m
+20 bits, movd instructions.
+
+@item Displacement Operand: s
+8 bits.
+
+@item Displacement Operand: m
+16 bits.
+
+@item Displacement Operand: l
+24 bits
+
@end table
For example:
diff --git c/gas/doc/c-mips.texi i/gas/doc/c-mips.texi
index 715091e..1250c1e 100644
--- c/gas/doc/c-mips.texi
+++ i/gas/doc/c-mips.texi
@@ -220,7 +220,7 @@ the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
instructions around accesses to the @samp{HI} and @samp{LO} registers.
@samp{-no-m4650} turns off this option.
-@itemx -m3900
+@item -m3900
@itemx -no-m3900
@itemx -m4100
@itemx -no-m4100
diff --git c/gas/doc/c-score.texi i/gas/doc/c-score.texi
index 0820115..a5b570f 100644
--- c/gas/doc/c-score.texi
+++ i/gas/doc/c-score.texi
@@ -36,7 +36,7 @@ implicitly with the @code{gp} register. The default value is 8.
@item -EB
Assemble code for a big-endian cpu
-@itemx -EL
+@item -EL
Assemble code for a little-endian cpu
@item -FIXDD
@@ -48,13 +48,13 @@ Assemble code for no warning message for fix data dependency
@item -SCORE5
Assemble code for target is SCORE5
-@itemx -SCORE5U
+@item -SCORE5U
Assemble code for target is SCORE5U
-@itemx -SCORE7
+@item -SCORE7
Assemble code for target is SCORE7, this is default setting
-@itemx -SCORE3
+@item -SCORE3
Assemble code for target is SCORE3
@item -march=score7
diff --git c/gas/doc/c-tic54x.texi i/gas/doc/c-tic54x.texi
index 4cfb440..9d631a6 100644
--- c/gas/doc/c-tic54x.texi
+++ i/gas/doc/c-tic54x.texi
@@ -108,7 +108,7 @@ In this example, x is replaced with SYM2; SYM2 is replaced with SYM1, and SYM1
is replaced with x. At this point, x has already been encountered
and the substitution stops.
-@smallexample @code
+@smallexample
.asg "x",SYM1
.asg "SYM1",SYM2
.asg "SYM2",x
@@ -125,14 +125,14 @@ Substitution may be forced in situations where replacement might be
ambiguous by placing colons on either side of the subsym. The following
code:
-@smallexample @code
+@smallexample
.eval "10",x
LAB:X: add #x, a
@end smallexample
When assembled becomes:
-@smallexample @code
+@smallexample
LAB10 add #10, a
@end smallexample
@@ -308,7 +308,7 @@ The @code{LDX} pseudo-op is provided for loading the extended addressing bits
of a label or address. For example, if an address @code{_label} resides
in extended program memory, the value of @code{_label} may be loaded as
follows:
-@smallexample @code
+@smallexample
ldx #_label,16,a ; loads extended bits of _label
or #_label,a ; loads lower 16 bits of _label
bacc a ; full address is in accumulator A
@@ -344,7 +344,7 @@ Assign @var{name} the string @var{string}. String replacement is
performed on @var{string} before assignment.
@cindex @code{eval} directive, TIC54X
-@itemx .eval @var{string}, @var{name}
+@item .eval @var{string}, @var{name}
Evaluate the contents of string @var{string} and assign the result as a
string to the subsym @var{name}. String replacement is performed on
@var{string} before assignment.

108
base/binutils/0003-binutils-texinfo-5.0.patch

@ -0,0 +1,108 @@
# --- SDE-COPYRIGHT-NOTE-BEGIN ---
# This copyright note is auto-generated by ./scripts/Create-CopyPatch.
#
# Filename: package/.../binutils/0003-binutils-texinfo-5.0.patch
# Copyright (C) 2014 The OpenSDE Project
#
# More information can be found in the files COPYING and README.
#
# This patch file is dual-licensed. It is available under the license the
# patched project is licensed under, as long as it is an OpenSource license
# as defined at http://www.opensource.org/ (e.g. BSD, X11) or under the terms
# of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
# --- SDE-COPYRIGHT-NOTE-END ---
based on https://raw.githubusercontent.com/jck/pkgbuilds/master/binutils-msp430/0003-binutils-texinfo-5.0.patch
diff --git i/bfd/doc/bfd.texinfo w/bfd/doc/bfd.texinfo
index 45ffa73..c3ca5e7 100644
--- i/bfd/doc/bfd.texinfo
+++ w/bfd/doc/bfd.texinfo
@@ -322,7 +322,7 @@ All of BFD lives in one directory.
@printindex cp
@tex
-% I think something like @colophon should be in texinfo. In the
+% I think something like @@colophon should be in texinfo. In the
% meantime:
\long\def\colophon{\hbox to0pt{}\vfill
\centerline{The body of this manual is set in}
@@ -333,7 +333,7 @@ All of BFD lives in one directory.
\centerline{{\sl\fontname\tensl\/}}
\centerline{are used for emphasis.}\vfill}
\page\colophon
-% Blame: doc@cygnus.com, 28mar91.
+% Blame: doc@@cygnus.com, 28mar91.
@end tex
@bye
--- ./binutils/doc/binutils.texi.orig 2014-08-06 21:25:08.000000000 +0200
+++ ./binutils/doc/binutils.texi 2014-08-06 21:27:25.000000000 +0200
@@ -4375,7 +4375,7 @@
@table @env
-@itemx --input-mach=@var{machine}
+@item --input-mach=@var{machine}
Set the matching input ELF machine type to @var{machine}. If
@option{--input-mach} isn't specified, it will match any ELF
machine types.
@@ -4383,21 +4383,21 @@
The supported ELF machine types are, @var{L1OM}, @var{K1OM} and
@var{x86-64}.
-@itemx --output-mach=@var{machine}
+@item --output-mach=@var{machine}
Change the ELF machine type in the ELF header to @var{machine}. The
supported ELF machine types are the same as @option{--input-mach}.
-@itemx --input-type=@var{type}
+@item --input-type=@var{type}
Set the matching input ELF file type to @var{type}. If
@option{--input-type} isn't specified, it will match any ELF file types.
The supported ELF file types are, @var{rel}, @var{exec} and @var{dyn}.
-@itemx --output-type=@var{type}
+@item --output-type=@var{type}
Change the ELF file type in the ELF header to @var{type}. The
supported ELF types are the same as @option{--input-type}.
-@itemx --input-osabi=@var{osabi}
+@item --input-osabi=@var{osabi}
Set the matching input ELF file OSABI to @var{osabi}. If
@option{--input-osabi} isn't specified, it will match any ELF OSABIs.
@@ -4407,7 +4407,7 @@
@var{FreeBSD}, @var{TRU64}, @var{Modesto}, @var{OpenBSD}, @var{OpenVMS},
@var{NSK}, @var{AROS} and @var{FenixOS}.
-@itemx --output-osabi=@var{osabi}
+@item --output-osabi=@var{osabi}
Change the ELF OSABI in the ELF header to @var{osabi}. The
supported ELF OSABI are the same as @option{--input-osabi}.
diff --git i/ld/ld.texinfo w/ld/ld.texinfo
index 879bcfc..0a0845d 100644
--- i/ld/ld.texinfo
+++ w/ld/ld.texinfo
@@ -7694,7 +7694,7 @@ If you have more than one @code{SECT} statement for the same
@printindex cp
@tex
-% I think something like @colophon should be in texinfo. In the
+% I think something like @@colophon should be in texinfo. In the
% meantime:
\long\def\colophon{\hbox to0pt{}\vfill
\centerline{The body of this manual is set in}
@@ -7705,7 +7705,7 @@ If you have more than one @code{SECT} statement for the same
\centerline{{\sl\fontname\tensl\/}}
\centerline{are used for emphasis.}\vfill}
\page\colophon
-% Blame: doc@cygnus.com, 28mar91.
+% Blame: doc@@cygnus.com, 28mar91.
@end tex
@bye
Loading…
Cancel
Save