You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1905 lines
72 KiB

# --- T2-COPYRIGHT-NOTE-BEGIN ---
# This copyright note is auto-generated by ./scripts/Create-CopyPatch.
#
# T2 SDE: package/.../libjpeg/crop.patch
# Copyright (C) 2004 - 2006 The T2 SDE Project
#
# More information can be found in the files COPYING and README.
#
# This patch file is dual-licensed. It is available under the license the
# patched project is licensed under, as long as it is an OpenSource license
# as defined at http://www.opensource.org/ (e.g. BSD, X11) or under the terms
# of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
# --- T2-COPYRIGHT-NOTE-END ---
Cropping feature from http://sylvana.net/jpegcrop/jpegtran/ - which was
released as tarball and not patch ...
- Rene Rebe <rene@exactcode.de>
diff -u jpeg-6b/jerror.h jpeg-6b-new/jerror.h
--- jpeg-6b/jerror.h 1997-10-18 20:59:10.000000000 +0200
+++ jpeg-6b-new/jerror.h 2000-03-05 23:34:27.000000000 +0100
@@ -45,6 +45,7 @@
JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
+JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request")
JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
diff -u jpeg-6b/jpegtran.c jpeg-6b-new/jpegtran.c
--- jpeg-6b/jpegtran.c 1997-07-24 04:37:26.000000000 +0200
+++ jpeg-6b-new/jpegtran.c 2003-09-21 21:30:21.000000000 +0200
@@ -1,7 +1,7 @@
/*
* jpegtran.c
*
- * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Copyright (C) 1995-2001, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
@@ -64,8 +64,10 @@
#endif
#if TRANSFORMS_SUPPORTED
fprintf(stderr, "Switches for modifying the image:\n");
+ fprintf(stderr, " -crop WxH+X+Y Crop to a rectangular subarea\n");
fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n");
fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n");
+ fprintf(stderr, " -perfect Fail if there is non-transformable edge blocks\n");
fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n");
fprintf(stderr, " -transpose Transpose image\n");
fprintf(stderr, " -transverse Transverse transpose image\n");
@@ -133,7 +135,9 @@
copyoption = JCOPYOPT_DEFAULT;
transformoption.transform = JXFORM_NONE;
transformoption.trim = FALSE;
+ transformoption.perfect = FALSE;
transformoption.force_grayscale = FALSE;
+ transformoption.crop = FALSE;
cinfo->err->trace_level = 0;
/* Scan command line options, adjust parameters */
@@ -160,7 +164,7 @@
exit(EXIT_FAILURE);
#endif
- } else if (keymatch(arg, "copy", 1)) {
+ } else if (keymatch(arg, "copy", 2)) {
/* Select which extra markers to copy. */
if (++argn >= argc) /* advance to next argument */
usage();
@@ -173,6 +177,20 @@
} else
usage();
+ } else if (keymatch(arg, "crop", 2)) {
+ /* Perform lossless cropping. */
+#if TRANSFORMS_SUPPORTED
+ if (++argn >= argc) /* advance to next argument */
+ usage();
+ if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+ fprintf(stderr, "%s: bogus -crop argument '%s'\n",
+ progname, argv[argn]);
+ exit(EXIT_FAILURE);
+ }
+#else
+ select_transform(JXFORM_NONE); /* force an error */
+#endif
+
} else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
/* Enable debug printouts. */
/* On first -d, print version identification */
@@ -233,7 +251,12 @@
usage();
outfilename = argv[argn]; /* save it away for later use */
- } else if (keymatch(arg, "progressive", 1)) {
+ } else if (keymatch(arg, "perfect", 2)) {
+ /* Fail if there is any partial edge MCUs that the transform can't
+ * handle. */
+ transformoption.perfect = TRUE;
+
+ } else if (keymatch(arg, "progressive", 2)) {
/* Select simple progressive mode. */
#ifdef C_PROGRESSIVE_SUPPORTED
simple_progressive = TRUE;
@@ -342,8 +365,10 @@
jvirt_barray_ptr * src_coef_arrays;
jvirt_barray_ptr * dst_coef_arrays;
int file_index;
- FILE * input_file;
- FILE * output_file;
+ /* We assume all-in-memory processing and can therefore use only a
+ * single file pointer for sequential input and output operation.
+ */
+ FILE * fp;
/* On Mac, fetch a command line. */
#ifdef USE_CCOMMAND
@@ -406,24 +431,13 @@
/* Open the input file. */
if (file_index < argc) {
- if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+ if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
+ fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
exit(EXIT_FAILURE);
}
} else {
/* default input file is stdin */
- input_file = read_stdin();
- }
-
- /* Open the output file. */
- if (outfilename != NULL) {
- if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default output file is stdout */
- output_file = write_stdout();
+ fp = read_stdin();
}
#ifdef PROGRESS_REPORT
@@ -431,7 +445,7 @@
#endif
/* Specify data source for decompression */
- jpeg_stdio_src(&srcinfo, input_file);
+ jpeg_stdio_src(&srcinfo, fp);
/* Enable saving of extra markers that we want to copy */
jcopy_markers_setup(&srcinfo, copyoption);
@@ -443,6 +457,15 @@
* jpeg_read_coefficients so that memory allocation will be done right.
*/
#if TRANSFORMS_SUPPORTED
+ /* Fails right away if -perfect is given and transformation is not perfect.
+ */
+ if (transformoption.perfect &&
+ !jtransform_perfect_transform(srcinfo.image_width, srcinfo.image_height,
+ srcinfo.max_h_samp_factor * DCTSIZE, srcinfo.max_v_samp_factor * DCTSIZE,
+ transformoption.transform)) {
+ fprintf(stderr, "%s: transformation is not perfect\n", progname);
+ exit(EXIT_FAILURE);
+ }
jtransform_request_workspace(&srcinfo, &transformoption);
#endif
@@ -463,11 +486,32 @@
dst_coef_arrays = src_coef_arrays;
#endif
+ /* Close input file, if we opened it.
+ * Note: we assume that jpeg_read_coefficients consumed all input
+ * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
+ * only consume more while (! cinfo->inputctl->eoi_reached).
+ * We cannot call jpeg_finish_decompress here since we still need the
+ * virtual arrays allocated from the source object for processing.
+ */
+ if (fp != stdin)
+ fclose(fp);
+
+ /* Open the output file. */
+ if (outfilename != NULL) {
+ if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
+ fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
+ exit(EXIT_FAILURE);
+ }
+ } else {
+ /* default output file is stdout */
+ fp = write_stdout();
+ }
+
/* Adjust default compression parameters by re-parsing the options */
file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
/* Specify data destination for compression */
- jpeg_stdio_dest(&dstinfo, output_file);
+ jpeg_stdio_dest(&dstinfo, fp);
/* Start compressor (note no image data is actually written here) */
jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
@@ -488,11 +532,9 @@
(void) jpeg_finish_decompress(&srcinfo);
jpeg_destroy_decompress(&srcinfo);
- /* Close files, if we opened them */
- if (input_file != stdin)
- fclose(input_file);
- if (output_file != stdout)
- fclose(output_file);
+ /* Close output file, if we opened it */
+ if (fp != stdout)
+ fclose(fp);
#ifdef PROGRESS_REPORT
end_progress_monitor((j_common_ptr) &dstinfo);
diff -u jpeg-6b/transupp.c jpeg-6b-new/transupp.c
--- jpeg-6b/transupp.c 1997-08-10 02:15:26.000000000 +0200
+++ jpeg-6b-new/transupp.c 2003-09-21 22:50:33.000000000 +0200
@@ -1,7 +1,7 @@
/*
* transupp.c
*
- * Copyright (C) 1997, Thomas G. Lane.
+ * Copyright (C) 1997-2001, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
@@ -20,6 +20,7 @@
#include "jinclude.h"
#include "jpeglib.h"
#include "transupp.h" /* My own external interface */
+#include <ctype.h> /* to declare isdigit() */
#if TRANSFORMS_SUPPORTED
@@ -28,7 +29,8 @@
* Lossless image transformation routines. These routines work on DCT
* coefficient arrays and thus do not require any lossy decompression
* or recompression of the image.
- * Thanks to Guido Vollbeding for the initial design and code of this feature.
+ * Thanks to Guido Vollbeding for the initial design and code of this feature,
+ * and to Ben Jackson for introducing the cropping feature.
*
* Horizontal flipping is done in-place, using a single top-to-bottom
* pass through the virtual source array. It will thus be much the
@@ -42,6 +44,13 @@
* arrays for most of the transforms. That could result in much thrashing
* if the image is larger than main memory.
*
+ * If cropping or trimming is involved, the destination arrays may be smaller
+ * than the source arrays. Note it is not possible to do horizontal flip
+ * in-place when a nonzero Y crop offset is specified, since we'd have to move
+ * data from one block row to another but the virtual array manager doesn't
+ * guarantee we can touch more than one row at a time. So in that case,
+ * we have to use a separate destination array.
+ *
* Some notes about the operating environment of the individual transform
* routines:
* 1. Both the source and destination virtual arrays are allocated from the
@@ -54,20 +63,65 @@
* and we may as well take that as the effective iMCU size.
* 4. When "trim" is in effect, the destination's dimensions will be the
* trimmed values but the source's will be untrimmed.
- * 5. All the routines assume that the source and destination buffers are
+ * 5. When "crop" is in effect, the destination's dimensions will be the
+ * cropped values but the source's will be uncropped. Each transform
+ * routine is responsible for picking up source data starting at the
+ * correct X and Y offset for the crop region. (The X and Y offsets
+ * passed to the transform routines are measured in iMCU blocks of the
+ * destination.)
+ * 6. All the routines assume that the source and destination buffers are
* padded out to a full iMCU boundary. This is true, although for the
* source buffer it is an undocumented property of jdcoefct.c.
- * Notes 2,3,4 boil down to this: generally we should use the destination's
- * dimensions and ignore the source's.
*/
LOCAL(void)
-do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays)
-/* Horizontal flip; done in-place, so no separate dest array is required */
+do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+ jvirt_barray_ptr *src_coef_arrays,
+ jvirt_barray_ptr *dst_coef_arrays)
+/* Crop. This is only used when no rotate/flip is requested with the crop. */
+{
+ JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+ int ci, offset_y;
+ JBLOCKARRAY src_buffer, dst_buffer;
+ jpeg_component_info *compptr;
+
+ /* We simply have to copy the right amount of data (the destination's
+ * image size) starting at the given X and Y offsets in the source.
+ */
+ for (ci = 0; ci < dstinfo->num_components; ci++) {
+ compptr = dstinfo->comp_info + ci;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+ for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+ dst_blk_y += compptr->v_samp_factor) {
+ dst_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+ (JDIMENSION) compptr->v_samp_factor, TRUE);
+ src_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_y + y_crop_blocks,
+ (JDIMENSION) compptr->v_samp_factor, FALSE);
+ for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+ jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+ dst_buffer[offset_y],
+ compptr->width_in_blocks);
+ }
+ }
+ }
+}
+
+
+LOCAL(void)
+do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset,
+ jvirt_barray_ptr *src_coef_arrays)
+/* Horizontal flip; done in-place, so no separate dest array is required.
+ * NB: this only works when y_crop_offset is zero.
+ */
{
- JDIMENSION MCU_cols, comp_width, blk_x, blk_y;
+ JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks;
int ci, k, offset_y;
JBLOCKARRAY buffer;
JCOEFPTR ptr1, ptr2;
@@ -79,17 +133,19 @@
* mirroring by changing the signs of odd-numbered columns.
* Partial iMCUs at the right edge are left untouched.
*/
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+ MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
comp_width = MCU_cols * compptr->h_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
for (blk_y = 0; blk_y < compptr->height_in_blocks;
blk_y += compptr->v_samp_factor) {
buffer = (*srcinfo->mem->access_virt_barray)
((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
(JDIMENSION) compptr->v_samp_factor, TRUE);
for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+ /* Do the mirroring */
for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
ptr1 = buffer[offset_y][blk_x];
ptr2 = buffer[offset_y][comp_width - blk_x - 1];
@@ -105,6 +161,79 @@
*ptr2++ = -temp1;
}
}
+ if (x_crop_blocks > 0) {
+ /* Now left-justify the portion of the data to be kept.
+ * We can't use a single jcopy_block_row() call because that routine
+ * depends on memcpy(), whose behavior is unspecified for overlapping
+ * source and destination areas. Sigh.
+ */
+ for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+ jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks,
+ buffer[offset_y] + blk_x,
+ (JDIMENSION) 1);
+ }
+ }
+ }
+ }
+ }
+}
+
+
+LOCAL(void)
+do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+ jvirt_barray_ptr *src_coef_arrays,
+ jvirt_barray_ptr *dst_coef_arrays)
+/* Horizontal flip in general cropping case */
+{
+ JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+ JDIMENSION x_crop_blocks, y_crop_blocks;
+ int ci, k, offset_y;
+ JBLOCKARRAY src_buffer, dst_buffer;
+ JBLOCKROW src_row_ptr, dst_row_ptr;
+ JCOEFPTR src_ptr, dst_ptr;
+ jpeg_component_info *compptr;
+
+ /* Here we must output into a separate array because we can't touch
+ * different rows of a single virtual array simultaneously. Otherwise,
+ * this is essentially the same as the routine above.
+ */
+ MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+
+ for (ci = 0; ci < dstinfo->num_components; ci++) {
+ compptr = dstinfo->comp_info + ci;
+ comp_width = MCU_cols * compptr->h_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+ for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+ dst_blk_y += compptr->v_samp_factor) {
+ dst_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+ (JDIMENSION) compptr->v_samp_factor, TRUE);
+ src_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_y + y_crop_blocks,
+ (JDIMENSION) compptr->v_samp_factor, FALSE);
+ for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+ dst_row_ptr = dst_buffer[offset_y];
+ src_row_ptr = src_buffer[offset_y];
+ for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+ if (x_crop_blocks + dst_blk_x < comp_width) {
+ /* Do the mirrorable blocks */
+ dst_ptr = dst_row_ptr[dst_blk_x];
+ src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+ /* this unrolled loop doesn't need to know which row it's on... */
+ for (k = 0; k < DCTSIZE2; k += 2) {
+ *dst_ptr++ = *src_ptr++; /* copy even column */
+ *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */
+ }
+ } else {
+ /* Copy last partial block(s) verbatim */
+ jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+ dst_row_ptr + dst_blk_x,
+ (JDIMENSION) 1);
+ }
+ }
}
}
}
@@ -113,11 +242,13 @@
LOCAL(void)
do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
jvirt_barray_ptr *src_coef_arrays,
jvirt_barray_ptr *dst_coef_arrays)
/* Vertical flip */
{
JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+ JDIMENSION x_crop_blocks, y_crop_blocks;
int ci, i, j, offset_y;
JBLOCKARRAY src_buffer, dst_buffer;
JBLOCKROW src_row_ptr, dst_row_ptr;
@@ -131,33 +262,38 @@
* of odd-numbered rows.
* Partial iMCUs at the bottom edge are copied verbatim.
*/
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+ MCU_rows = srcinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
comp_height = MCU_rows * compptr->v_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
dst_blk_y += compptr->v_samp_factor) {
dst_buffer = (*srcinfo->mem->access_virt_barray)
((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
(JDIMENSION) compptr->v_samp_factor, TRUE);
- if (dst_blk_y < comp_height) {
+ if (y_crop_blocks + dst_blk_y < comp_height) {
/* Row is within the mirrorable area. */
src_buffer = (*srcinfo->mem->access_virt_barray)
((j_common_ptr) srcinfo, src_coef_arrays[ci],
- comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
+ comp_height - y_crop_blocks - dst_blk_y -
+ (JDIMENSION) compptr->v_samp_factor,
(JDIMENSION) compptr->v_samp_factor, FALSE);
} else {
/* Bottom-edge blocks will be copied verbatim. */
src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_y + y_crop_blocks,
(JDIMENSION) compptr->v_samp_factor, FALSE);
}
for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- if (dst_blk_y < comp_height) {
+ if (y_crop_blocks + dst_blk_y < comp_height) {
/* Row is within the mirrorable area. */
dst_row_ptr = dst_buffer[offset_y];
src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+ src_row_ptr += x_crop_blocks;
for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
dst_blk_x++) {
dst_ptr = dst_row_ptr[dst_blk_x];
@@ -173,7 +309,8 @@
}
} else {
/* Just copy row verbatim. */
- jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y],
+ jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+ dst_buffer[offset_y],
compptr->width_in_blocks);
}
}
@@ -184,11 +321,12 @@
LOCAL(void)
do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
jvirt_barray_ptr *src_coef_arrays,
jvirt_barray_ptr *dst_coef_arrays)
/* Transpose source into destination */
{
- JDIMENSION dst_blk_x, dst_blk_y;
+ JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
int ci, i, j, offset_x, offset_y;
JBLOCKARRAY src_buffer, dst_buffer;
JCOEFPTR src_ptr, dst_ptr;
@@ -201,6 +339,8 @@
*/
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
dst_blk_y += compptr->v_samp_factor) {
dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -210,11 +350,12 @@
for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
dst_blk_x += compptr->h_samp_factor) {
src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_x + x_crop_blocks,
(JDIMENSION) compptr->h_samp_factor, FALSE);
for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+ src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks];
for (i = 0; i < DCTSIZE; i++)
for (j = 0; j < DCTSIZE; j++)
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -228,6 +369,7 @@
LOCAL(void)
do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
jvirt_barray_ptr *src_coef_arrays,
jvirt_barray_ptr *dst_coef_arrays)
/* 90 degree rotation is equivalent to
@@ -237,6 +379,7 @@
*/
{
JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+ JDIMENSION x_crop_blocks, y_crop_blocks;
int ci, i, j, offset_x, offset_y;
JBLOCKARRAY src_buffer, dst_buffer;
JCOEFPTR src_ptr, dst_ptr;
@@ -246,11 +389,13 @@
* at the (output) right edge properly. They just get transposed and
* not mirrored.
*/
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+ MCU_cols = srcinfo->image_height / (dstinfo->max_h_samp_factor * DCTSIZE);
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
comp_width = MCU_cols * compptr->h_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
dst_blk_y += compptr->v_samp_factor) {
dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -259,15 +404,26 @@
for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
dst_blk_x += compptr->h_samp_factor) {
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
- (JDIMENSION) compptr->h_samp_factor, FALSE);
+ if (x_crop_blocks + dst_blk_x < comp_width) {
+ /* Block is within the mirrorable area. */
+ src_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ comp_width - x_crop_blocks - dst_blk_x -
+ (JDIMENSION) compptr->h_samp_factor,
+ (JDIMENSION) compptr->h_samp_factor, FALSE);
+ } else {
+ /* Edge blocks are transposed but not mirrored. */
+ src_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_x + x_crop_blocks,
+ (JDIMENSION) compptr->h_samp_factor, FALSE);
+ }
for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
- if (dst_blk_x < comp_width) {
+ dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+ if (x_crop_blocks + dst_blk_x < comp_width) {
/* Block is within the mirrorable area. */
- dst_ptr = dst_buffer[offset_y]
- [comp_width - dst_blk_x - offset_x - 1];
+ src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+ [dst_blk_y + offset_y + y_crop_blocks];
for (i = 0; i < DCTSIZE; i++) {
for (j = 0; j < DCTSIZE; j++)
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -277,7 +433,8 @@
}
} else {
/* Edge blocks are transposed but not mirrored. */
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+ src_ptr = src_buffer[offset_x]
+ [dst_blk_y + offset_y + y_crop_blocks];
for (i = 0; i < DCTSIZE; i++)
for (j = 0; j < DCTSIZE; j++)
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -292,6 +449,7 @@
LOCAL(void)
do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
jvirt_barray_ptr *src_coef_arrays,
jvirt_barray_ptr *dst_coef_arrays)
/* 270 degree rotation is equivalent to
@@ -301,6 +459,7 @@
*/
{
JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+ JDIMENSION x_crop_blocks, y_crop_blocks;
int ci, i, j, offset_x, offset_y;
JBLOCKARRAY src_buffer, dst_buffer;
JCOEFPTR src_ptr, dst_ptr;
@@ -310,11 +469,13 @@
* at the (output) bottom edge properly. They just get transposed and
* not mirrored.
*/
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+ MCU_rows = srcinfo->image_width / (dstinfo->max_v_samp_factor * DCTSIZE);
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
comp_height = MCU_rows * compptr->v_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
dst_blk_y += compptr->v_samp_factor) {
dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -324,14 +485,15 @@
for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
dst_blk_x += compptr->h_samp_factor) {
src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_x + x_crop_blocks,
(JDIMENSION) compptr->h_samp_factor, FALSE);
for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
- if (dst_blk_y < comp_height) {
+ if (y_crop_blocks + dst_blk_y < comp_height) {
/* Block is within the mirrorable area. */
src_ptr = src_buffer[offset_x]
- [comp_height - dst_blk_y - offset_y - 1];
+ [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
for (i = 0; i < DCTSIZE; i++) {
for (j = 0; j < DCTSIZE; j++) {
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -341,7 +503,8 @@
}
} else {
/* Edge blocks are transposed but not mirrored. */
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
+ src_ptr = src_buffer[offset_x]
+ [dst_blk_y + offset_y + y_crop_blocks];
for (i = 0; i < DCTSIZE; i++)
for (j = 0; j < DCTSIZE; j++)
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -356,6 +519,7 @@
LOCAL(void)
do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
jvirt_barray_ptr *src_coef_arrays,
jvirt_barray_ptr *dst_coef_arrays)
/* 180 degree rotation is equivalent to
@@ -365,89 +529,93 @@
*/
{
JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+ JDIMENSION x_crop_blocks, y_crop_blocks;
int ci, i, j, offset_y;
JBLOCKARRAY src_buffer, dst_buffer;
JBLOCKROW src_row_ptr, dst_row_ptr;
JCOEFPTR src_ptr, dst_ptr;
jpeg_component_info *compptr;
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+ MCU_cols = srcinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
+ MCU_rows = srcinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
comp_width = MCU_cols * compptr->h_samp_factor;
comp_height = MCU_rows * compptr->v_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
dst_blk_y += compptr->v_samp_factor) {
dst_buffer = (*srcinfo->mem->access_virt_barray)
((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
(JDIMENSION) compptr->v_samp_factor, TRUE);
- if (dst_blk_y < comp_height) {
+ if (y_crop_blocks + dst_blk_y < comp_height) {
/* Row is within the vertically mirrorable area. */
src_buffer = (*srcinfo->mem->access_virt_barray)
((j_common_ptr) srcinfo, src_coef_arrays[ci],
- comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
+ comp_height - y_crop_blocks - dst_blk_y -
+ (JDIMENSION) compptr->v_samp_factor,
(JDIMENSION) compptr->v_samp_factor, FALSE);
} else {
/* Bottom-edge rows are only mirrored horizontally. */
src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_y + y_crop_blocks,
(JDIMENSION) compptr->v_samp_factor, FALSE);
}
for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- if (dst_blk_y < comp_height) {
+ dst_row_ptr = dst_buffer[offset_y];
+ if (y_crop_blocks + dst_blk_y < comp_height) {
/* Row is within the mirrorable area. */
- dst_row_ptr = dst_buffer[offset_y];
src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
- /* Process the blocks that can be mirrored both ways. */
- for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
+ for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
- for (i = 0; i < DCTSIZE; i += 2) {
- /* For even row, negate every odd column. */
- for (j = 0; j < DCTSIZE; j += 2) {
- *dst_ptr++ = *src_ptr++;
- *dst_ptr++ = - *src_ptr++;
+ if (x_crop_blocks + dst_blk_x < comp_width) {
+ /* Process the blocks that can be mirrored both ways. */
+ src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+ for (i = 0; i < DCTSIZE; i += 2) {
+ /* For even row, negate every odd column. */
+ for (j = 0; j < DCTSIZE; j += 2) {
+ *dst_ptr++ = *src_ptr++;
+ *dst_ptr++ = - *src_ptr++;
+ }
+ /* For odd row, negate every even column. */
+ for (j = 0; j < DCTSIZE; j += 2) {
+ *dst_ptr++ = - *src_ptr++;
+ *dst_ptr++ = *src_ptr++;
+ }
}
- /* For odd row, negate every even column. */
- for (j = 0; j < DCTSIZE; j += 2) {
- *dst_ptr++ = - *src_ptr++;
- *dst_ptr++ = *src_ptr++;
+ } else {
+ /* Any remaining right-edge blocks are only mirrored vertically. */
+ src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x];
+ for (i = 0; i < DCTSIZE; i += 2) {
+ for (j = 0; j < DCTSIZE; j++)
+ *dst_ptr++ = *src_ptr++;
+ for (j = 0; j < DCTSIZE; j++)
+ *dst_ptr++ = - *src_ptr++;
}
}
}
- /* Any remaining right-edge blocks are only mirrored vertically. */
- for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[dst_blk_x];
- for (i = 0; i < DCTSIZE; i += 2) {
- for (j = 0; j < DCTSIZE; j++)
- *dst_ptr++ = *src_ptr++;
- for (j = 0; j < DCTSIZE; j++)
- *dst_ptr++ = - *src_ptr++;
- }
- }
} else {
/* Remaining rows are just mirrored horizontally. */
- dst_row_ptr = dst_buffer[offset_y];
src_row_ptr = src_buffer[offset_y];
- /* Process the blocks that can be mirrored. */
- for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
- for (i = 0; i < DCTSIZE2; i += 2) {
- *dst_ptr++ = *src_ptr++;
- *dst_ptr++ = - *src_ptr++;
+ for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+ if (x_crop_blocks + dst_blk_x < comp_width) {
+ /* Process the blocks that can be mirrored. */
+ dst_ptr = dst_row_ptr[dst_blk_x];
+ src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+ for (i = 0; i < DCTSIZE2; i += 2) {
+ *dst_ptr++ = *src_ptr++;
+ *dst_ptr++ = - *src_ptr++;
+ }
+ } else {
+ /* Any remaining right-edge blocks are only copied. */
+ jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+ dst_row_ptr + dst_blk_x,
+ (JDIMENSION) 1);
}
}
- /* Any remaining right-edge blocks are only copied. */
- for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[dst_blk_x];
- for (i = 0; i < DCTSIZE2; i++)
- *dst_ptr++ = *src_ptr++;
- }
}
}
}
@@ -457,6 +625,7 @@
LOCAL(void)
do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+ JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
jvirt_barray_ptr *src_coef_arrays,
jvirt_barray_ptr *dst_coef_arrays)
/* Transverse transpose is equivalent to
@@ -470,18 +639,21 @@
*/
{
JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+ JDIMENSION x_crop_blocks, y_crop_blocks;
int ci, i, j, offset_x, offset_y;
JBLOCKARRAY src_buffer, dst_buffer;
JCOEFPTR src_ptr, dst_ptr;
jpeg_component_info *compptr;
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
+ MCU_cols = srcinfo->image_height / (dstinfo->max_h_samp_factor * DCTSIZE);
+ MCU_rows = srcinfo->image_width / (dstinfo->max_v_samp_factor * DCTSIZE);
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
comp_width = MCU_cols * compptr->h_samp_factor;
comp_height = MCU_rows * compptr->v_samp_factor;
+ x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+ y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
dst_blk_y += compptr->v_samp_factor) {
dst_buffer = (*srcinfo->mem->access_virt_barray)
@@ -490,17 +662,26 @@
for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
dst_blk_x += compptr->h_samp_factor) {
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
- (JDIMENSION) compptr->h_samp_factor, FALSE);
+ if (x_crop_blocks + dst_blk_x < comp_width) {
+ /* Block is within the mirrorable area. */
+ src_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ comp_width - x_crop_blocks - dst_blk_x -
+ (JDIMENSION) compptr->h_samp_factor,
+ (JDIMENSION) compptr->h_samp_factor, FALSE);
+ } else {
+ src_buffer = (*srcinfo->mem->access_virt_barray)
+ ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+ dst_blk_x + x_crop_blocks,
+ (JDIMENSION) compptr->h_samp_factor, FALSE);
+ }
for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- if (dst_blk_y < comp_height) {
- src_ptr = src_buffer[offset_x]
- [comp_height - dst_blk_y - offset_y - 1];
- if (dst_blk_x < comp_width) {
+ dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+ if (y_crop_blocks + dst_blk_y < comp_height) {
+ if (x_crop_blocks + dst_blk_x < comp_width) {
/* Block is within the mirrorable area. */
- dst_ptr = dst_buffer[offset_y]
- [comp_width - dst_blk_x - offset_x - 1];
+ src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+ [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
for (i = 0; i < DCTSIZE; i++) {
for (j = 0; j < DCTSIZE; j++) {
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -516,7 +697,8 @@
}
} else {
/* Right-edge blocks are mirrored in y only */
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+ src_ptr = src_buffer[offset_x]
+ [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
for (i = 0; i < DCTSIZE; i++) {
for (j = 0; j < DCTSIZE; j++) {
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -526,11 +708,10 @@
}
}
} else {
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
- if (dst_blk_x < comp_width) {
+ if (x_crop_blocks + dst_blk_x < comp_width) {
/* Bottom-edge blocks are mirrored in x only */
- dst_ptr = dst_buffer[offset_y]
- [comp_width - dst_blk_x - offset_x - 1];
+ src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+ [dst_blk_y + offset_y + y_crop_blocks];
for (i = 0; i < DCTSIZE; i++) {
for (j = 0; j < DCTSIZE; j++)
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -540,7 +721,8 @@
}
} else {
/* At lower right corner, just transpose, no mirroring */
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+ src_ptr = src_buffer[offset_x]
+ [dst_blk_y + offset_y + y_crop_blocks];
for (i = 0; i < DCTSIZE; i++)
for (j = 0; j < DCTSIZE; j++)
dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
@@ -554,8 +736,116 @@
}
+/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec.
+ * Returns TRUE if valid integer found, FALSE if not.
+ * *strptr is advanced over the digit string, and *result is set to its value.
+ */
+
+LOCAL(boolean)
+jt_read_integer (const char ** strptr, JDIMENSION * result)
+{
+ const char * ptr = *strptr;
+ JDIMENSION val = 0;
+
+ for (; isdigit(*ptr); ptr++) {
+ val = val * 10 + (JDIMENSION) (*ptr - '0');
+ }
+ *result = val;
+ if (ptr == *strptr)
+ return FALSE; /* oops, no digits */
+ *strptr = ptr;
+ return TRUE;
+}
+
+
+/* Parse a crop specification (written in X11 geometry style).
+ * The routine returns TRUE if the spec string is valid, FALSE if not.
+ *
+ * The crop spec string should have the format
+ * <width>x<height>{+-}<xoffset>{+-}<yoffset>
+ * where width, height, xoffset, and yoffset are unsigned integers.
+ * Each of the elements can be omitted to indicate a default value.
+ * (A weakness of this style is that it is not possible to omit xoffset
+ * while specifying yoffset, since they look alike.)
+ *
+ * This code is loosely based on XParseGeometry from the X11 distribution.
+ */
+
+GLOBAL(boolean)
+jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec)
+{
+ info->crop = FALSE;
+ info->crop_width_set = JCROP_UNSET;
+ info->crop_height_set = JCROP_UNSET;
+ info->crop_xoffset_set = JCROP_UNSET;
+ info->crop_yoffset_set = JCROP_UNSET;
+
+ if (isdigit(*spec)) {
+ /* fetch width */
+ if (! jt_read_integer(&spec, &info->crop_width))
+ return FALSE;
+ info->crop_width_set = JCROP_POS;
+ }
+ if (*spec == 'x' || *spec == 'X') {
+ /* fetch height */
+ spec++;
+ if (! jt_read_integer(&spec, &info->crop_height))
+ return FALSE;
+ info->crop_height_set = JCROP_POS;
+ }
+ if (*spec == '+' || *spec == '-') {
+ /* fetch xoffset */
+ info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+ spec++;
+ if (! jt_read_integer(&spec, &info->crop_xoffset))
+ return FALSE;
+ }
+ if (*spec == '+' || *spec == '-') {
+ /* fetch yoffset */
+ info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+ spec++;
+ if (! jt_read_integer(&spec, &info->crop_yoffset))
+ return FALSE;
+ }
+ /* We had better have gotten to the end of the string. */
+ if (*spec != '\0')
+ return FALSE;
+ info->crop = TRUE;
+ return TRUE;
+}
+
+
+/* Trim off any partial iMCUs on the indicated destination edge */
+
+LOCAL(void)
+trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width)
+{
+ JDIMENSION MCU_cols;
+
+ MCU_cols = info->output_width / (info->max_h_samp_factor * DCTSIZE);
+ if (MCU_cols > 0 && info->x_crop_offset + MCU_cols ==
+ full_width / (info->max_h_samp_factor * DCTSIZE))
+ info->output_width = MCU_cols * (info->max_h_samp_factor * DCTSIZE);
+}
+
+LOCAL(void)
+trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height)
+{
+ JDIMENSION MCU_rows;
+
+ MCU_rows = info->output_height / (info->max_v_samp_factor * DCTSIZE);
+ if (MCU_rows > 0 && info->y_crop_offset + MCU_rows ==
+ full_height / (info->max_v_samp_factor * DCTSIZE))
+ info->output_height = MCU_rows * (info->max_v_samp_factor * DCTSIZE);
+}
+
+
/* Request any required workspace.
*
+ * This routine figures out the size that the output image will be
+ * (which implies that all the transform parameters must be set before
+ * it is called).
+ *
* We allocate the workspace virtual arrays from the source decompression
* object, so that all the arrays (both the original data and the workspace)
* will be taken into account while making memory management decisions.
@@ -569,9 +859,13 @@
jpeg_transform_info *info)
{
jvirt_barray_ptr *coef_arrays = NULL;
+ boolean need_workspace, transpose_it;
jpeg_component_info *compptr;
- int ci;
+ JDIMENSION xoffset, yoffset, width_in_iMCUs, height_in_iMCUs;
+ JDIMENSION width_in_blocks, height_in_blocks;
+ int ci, h_samp_factor, v_samp_factor;
+ /* Determine number of components in output image */
if (info->force_grayscale &&
srcinfo->jpeg_color_space == JCS_YCbCr &&
srcinfo->num_components == 3) {
@@ -581,55 +875,181 @@
/* Process all the components */
info->num_components = srcinfo->num_components;
}
+ /* If there is only one output component, force the iMCU size to be 1;
+ * else use the source iMCU size. (This allows us to do the right thing
+ * when reducing color to grayscale, and also provides a handy way of
+ * cleaning up "funny" grayscale images whose sampling factors are not 1x1.)
+ */
+
+ switch (info->transform) {
+ case JXFORM_TRANSPOSE:
+ case JXFORM_TRANSVERSE:
+ case JXFORM_ROT_90:
+ case JXFORM_ROT_270:
+ info->output_width = srcinfo->image_height;
+ info->output_height = srcinfo->image_width;
+ if (info->num_components == 1) {
+ info->max_h_samp_factor = 1;
+ info->max_v_samp_factor = 1;
+ } else {
+ info->max_h_samp_factor = srcinfo->max_v_samp_factor;
+ info->max_v_samp_factor = srcinfo->max_h_samp_factor;
+ }
+ break;
+ default:
+ info->output_width = srcinfo->image_width;
+ info->output_height = srcinfo->image_height;
+ if (info->num_components == 1) {
+ info->max_h_samp_factor = 1;
+ info->max_v_samp_factor = 1;
+ } else {
+ info->max_h_samp_factor = srcinfo->max_h_samp_factor;
+ info->max_v_samp_factor = srcinfo->max_v_samp_factor;
+ }
+ break;
+ }
+
+ /* If cropping has been requested, compute the crop area's position and
+ * dimensions, ensuring that its upper left corner falls at an iMCU boundary.
+ */
+ if (info->crop) {
+ /* Insert default values for unset crop parameters */
+ if (info->crop_xoffset_set == JCROP_UNSET)
+ info->crop_xoffset = 0; /* default to +0 */
+ if (info->crop_yoffset_set == JCROP_UNSET)
+ info->crop_yoffset = 0; /* default to +0 */
+ if (info->crop_xoffset >= info->output_width ||
+ info->crop_yoffset >= info->output_height)
+ ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+ if (info->crop_width_set == JCROP_UNSET)
+ info->crop_width = info->output_width - info->crop_xoffset;
+ if (info->crop_height_set == JCROP_UNSET)
+ info->crop_height = info->output_height - info->crop_yoffset;
+ /* Ensure parameters are valid */
+ if (info->crop_width <= 0 || info->crop_width > info->output_width ||
+ info->crop_height <= 0 || info->crop_height > info->output_height ||
+ info->crop_xoffset > info->output_width - info->crop_width ||
+ info->crop_yoffset > info->output_height - info->crop_height)
+ ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+ /* Convert negative crop offsets into regular offsets */
+ if (info->crop_xoffset_set == JCROP_NEG)
+ xoffset = info->output_width - info->crop_width - info->crop_xoffset;
+ else
+ xoffset = info->crop_xoffset;
+ if (info->crop_yoffset_set == JCROP_NEG)
+ yoffset = info->output_height - info->crop_height - info->crop_yoffset;
+ else
+ yoffset = info->crop_yoffset;
+ /* Now adjust so that upper left corner falls at an iMCU boundary */
+ info->output_width =
+ info->crop_width + (xoffset % (info->max_h_samp_factor * DCTSIZE));
+ info->output_height =
+ info->crop_height + (yoffset % (info->max_v_samp_factor * DCTSIZE));
+ /* Save x/y offsets measured in iMCUs */
+ info->x_crop_offset = xoffset / (info->max_h_samp_factor * DCTSIZE);
+ info->y_crop_offset = yoffset / (info->max_v_samp_factor * DCTSIZE);
+ } else {
+ info->x_crop_offset = 0;
+ info->y_crop_offset = 0;
+ }
+ /* Figure out whether we need workspace arrays,
+ * and if so whether they are transposed relative to the source.
+ */
+ need_workspace = FALSE;
+ transpose_it = FALSE;
switch (info->transform) {
case JXFORM_NONE:
+ if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+ need_workspace = TRUE;
+ /* No workspace needed if neither cropping nor transforming */
+ break;
case JXFORM_FLIP_H:
- /* Don't need a workspace array */
+ if (info->trim)
+ trim_right_edge(info, srcinfo->image_width);
+ if (info->y_crop_offset != 0)
+ need_workspace = TRUE;
+ /* do_flip_h_no_crop doesn't need a workspace array */
break;
case JXFORM_FLIP_V:
- case JXFORM_ROT_180:
- /* Need workspace arrays having same dimensions as source image.
- * Note that we allocate arrays padded out to the next iMCU boundary,
- * so that transform routines need not worry about missing edge blocks.
- */
- coef_arrays = (jvirt_barray_ptr *)
- (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
- SIZEOF(jvirt_barray_ptr) * info->num_components);
- for (ci = 0; ci < info->num_components; ci++) {
- compptr = srcinfo->comp_info + ci;
- coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
- ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor),
- (JDIMENSION) compptr->v_samp_factor);
- }
+ if (info->trim)
+ trim_bottom_edge(info, srcinfo->image_height);
+ /* Need workspace arrays having same dimensions as source image. */
+ need_workspace = TRUE;
break;
case JXFORM_TRANSPOSE:
+ /* transpose does NOT have to trim anything */
+ /* Need workspace arrays having transposed dimensions. */
+ need_workspace = TRUE;
+ transpose_it = TRUE;
+ break;
case JXFORM_TRANSVERSE:
+ if (info->trim) {
+ trim_right_edge(info, srcinfo->image_height);
+ trim_bottom_edge(info, srcinfo->image_width);
+ }
+ /* Need workspace arrays having transposed dimensions. */
+ need_workspace = TRUE;
+ transpose_it = TRUE;
+ break;
case JXFORM_ROT_90:
+ if (info->trim)
+ trim_right_edge(info, srcinfo->image_height);
+ /* Need workspace arrays having transposed dimensions. */
+ need_workspace = TRUE;
+ transpose_it = TRUE;
+ break;
+ case JXFORM_ROT_180:
+ if (info->trim) {
+ trim_right_edge(info, srcinfo->image_width);
+ trim_bottom_edge(info, srcinfo->image_height);
+ }
+ /* Need workspace arrays having same dimensions as source image. */
+ need_workspace = TRUE;
+ break;
case JXFORM_ROT_270:
- /* Need workspace arrays having transposed dimensions.
- * Note that we allocate arrays padded out to the next iMCU boundary,
- * so that transform routines need not worry about missing edge blocks.
- */
+ if (info->trim)
+ trim_bottom_edge(info, srcinfo->image_width);
+ /* Need workspace arrays having transposed dimensions. */
+ need_workspace = TRUE;
+ transpose_it = TRUE;
+ break;
+ }
+
+ /* Allocate workspace if needed.
+ * Note that we allocate arrays padded out to the next iMCU boundary,
+ * so that transform routines need not worry about missing edge blocks.
+ */
+ if (need_workspace) {
coef_arrays = (jvirt_barray_ptr *)
(*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
- SIZEOF(jvirt_barray_ptr) * info->num_components);
+ SIZEOF(jvirt_barray_ptr) * info->num_components);
+ width_in_iMCUs = (JDIMENSION)
+ jdiv_round_up((long) info->output_width,
+ (long) (info->max_h_samp_factor * DCTSIZE));
+ height_in_iMCUs = (JDIMENSION)
+ jdiv_round_up((long) info->output_height,
+ (long) (info->max_v_samp_factor * DCTSIZE));
for (ci = 0; ci < info->num_components; ci++) {
compptr = srcinfo->comp_info + ci;
+ if (info->num_components == 1) {
+ /* we're going to force samp factors to 1x1 in this case */
+ h_samp_factor = v_samp_factor = 1;
+ } else if (transpose_it) {
+ h_samp_factor = compptr->v_samp_factor;
+ v_samp_factor = compptr->h_samp_factor;
+ } else {
+ h_samp_factor = compptr->h_samp_factor;
+ v_samp_factor = compptr->v_samp_factor;
+ }
+ width_in_blocks = width_in_iMCUs * h_samp_factor;
+ height_in_blocks = height_in_iMCUs * v_samp_factor;
coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor),
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) compptr->h_samp_factor);
+ width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor);
}
- break;
}
+
info->workspace_coef_arrays = coef_arrays;
}
@@ -642,14 +1062,8 @@
int tblno, i, j, ci, itemp;
jpeg_component_info *compptr;
JQUANT_TBL *qtblptr;
- JDIMENSION dtemp;
UINT16 qtemp;
- /* Transpose basic image dimensions */
- dtemp = dstinfo->image_width;
- dstinfo->image_width = dstinfo->image_height;
- dstinfo->image_height = dtemp;
-
/* Transpose sampling factors */
for (ci = 0; ci < dstinfo->num_components; ci++) {
compptr = dstinfo->comp_info + ci;
@@ -674,46 +1088,159 @@
}
-/* Trim off any partial iMCUs on the indicated destination edge */
+/* Adjust Exif image parameters.
+ *
+ * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible.
+ */
LOCAL(void)
-trim_right_edge (j_compress_ptr dstinfo)
+adjust_exif_parameters (JOCTET FAR * data, unsigned int length,
+ JDIMENSION new_width, JDIMENSION new_height)
{
- int ci, max_h_samp_factor;
- JDIMENSION MCU_cols;
+ boolean is_motorola; /* Flag for byte order */
+ unsigned int number_of_tags, tagnum;
+ unsigned int firstoffset, offset;
+ JDIMENSION new_value;
+
+ if (length < 12) return; /* Length of an IFD entry */
+
+ /* Discover byte order */
+ if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49)
+ is_motorola = FALSE;
+ else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D)
+ is_motorola = TRUE;
+ else
+ return;
+
+ /* Check Tag Mark */
+ if (is_motorola) {
+ if (GETJOCTET(data[2]) != 0) return;
+ if (GETJOCTET(data[3]) != 0x2A) return;
+ } else {
+ if (GETJOCTET(data[3]) != 0) return;
+ if (GETJOCTET(data[2]) != 0x2A) return;
+ }
- /* We have to compute max_h_samp_factor ourselves,
- * because it hasn't been set yet in the destination
- * (and we don't want to use the source's value).
- */
- max_h_samp_factor = 1;
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor;
- max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor);
+ /* Get first IFD offset (offset to IFD0) */
+ if (is_motorola) {
+ if (GETJOCTET(data[4]) != 0) return;
+ if (GETJOCTET(data[5]) != 0) return;
+ firstoffset = GETJOCTET(data[6]);
+ firstoffset <<= 8;
+ firstoffset += GETJOCTET(data[7]);
+ } else {
+ if (GETJOCTET(data[7]) != 0) return;
+ if (GETJOCTET(data[6]) != 0) return;
+ firstoffset = GETJOCTET(data[5]);
+ firstoffset <<= 8;
+ firstoffset += GETJOCTET(data[4]);
}
- MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE);
- if (MCU_cols > 0) /* can't trim to 0 pixels */
- dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE);
-}
+ if (firstoffset > length - 2) return; /* check end of data segment */
-LOCAL(void)
-trim_bottom_edge (j_compress_ptr dstinfo)
-{
- int ci, max_v_samp_factor;
- JDIMENSION MCU_rows;
+ /* Get the number of directory entries contained in this IFD */
+ if (is_motorola) {
+ number_of_tags = GETJOCTET(data[firstoffset]);
+ number_of_tags <<= 8;
+ number_of_tags += GETJOCTET(data[firstoffset+1]);
+ } else {
+ number_of_tags = GETJOCTET(data[firstoffset+1]);
+ number_of_tags <<= 8;
+ number_of_tags += GETJOCTET(data[firstoffset]);
+ }
+ if (number_of_tags == 0) return;
+ firstoffset += 2;
- /* We have to compute max_v_samp_factor ourselves,
- * because it hasn't been set yet in the destination
- * (and we don't want to use the source's value).
- */
- max_v_samp_factor = 1;
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor;
- max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor);
+ /* Search for ExifSubIFD offset Tag in IFD0 */
+ for (;;) {
+ if (firstoffset > length - 12) return; /* check end of data segment */
+ /* Get Tag number */
+ if (is_motorola) {
+ tagnum = GETJOCTET(data[firstoffset]);
+ tagnum <<= 8;
+ tagnum += GETJOCTET(data[firstoffset+1]);
+ } else {
+ tagnum = GETJOCTET(data[firstoffset+1]);
+ tagnum <<= 8;
+ tagnum += GETJOCTET(data[firstoffset]);
+ }
+ if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */
+ if (--number_of_tags == 0) return;
+ firstoffset += 12;
}
- MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE);
- if (MCU_rows > 0) /* can't trim to 0 pixels */
- dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE);
+
+ /* Get the ExifSubIFD offset */
+ if (is_motorola) {
+ if (GETJOCTET(data[firstoffset+8]) != 0) return;
+ if (GETJOCTET(data[firstoffset+9]) != 0) return;
+ offset = GETJOCTET(data[firstoffset+10]);
+ offset <<= 8;
+ offset += GETJOCTET(data[firstoffset+11]);
+ } else {
+ if (GETJOCTET(data[firstoffset+11]) != 0) return;
+ if (GETJOCTET(data[firstoffset+10]) != 0) return;
+ offset = GETJOCTET(data[firstoffset+9]);
+ offset <<= 8;
+ offset += GETJOCTET(data[firstoffset+8]);
+ }
+ if (offset > length - 2) return; /* check end of data segment */
+
+ /* Get the number of directory entries contained in this SubIFD */
+ if (is_motorola) {
+ number_of_tags = GETJOCTET(data[offset]);
+ number_of_tags <<= 8;
+ number_of_tags += GETJOCTET(data[offset+1]);
+ } else {
+ number_of_tags = GETJOCTET(data[offset+1]);
+ number_of_tags <<= 8;
+ number_of_tags += GETJOCTET(data[offset]);
+ }
+ if (number_of_tags < 2) return;
+ offset += 2;
+
+ /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */
+ do {
+ if (offset > length - 12) return; /* check end of data segment */
+ /* Get Tag number */
+ if (is_motorola) {
+ tagnum = GETJOCTET(data[offset]);
+ tagnum <<= 8;
+ tagnum += GETJOCTET(data[offset+1]);
+ } else {
+ tagnum = GETJOCTET(data[offset+1]);
+ tagnum <<= 8;
+ tagnum += GETJOCTET(data[offset]);
+ }
+ if (tagnum == 0xA002 || tagnum == 0xA003) {
+ if (tagnum == 0xA002)
+ new_value = new_width; /* ExifImageWidth Tag */
+ else
+ new_value = new_height; /* ExifImageHeight Tag */
+ if (is_motorola) {
+ data[offset+2] = 0; /* Format = unsigned long (4 octets) */
+ data[offset+3] = 4;
+ data[offset+4] = 0; /* Number Of Components = 1 */
+ data[offset+5] = 0;
+ data[offset+6] = 0;
+ data[offset+7] = 1;
+ data[offset+8] = 0;
+ data[offset+9] = 0;
+ data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF);
+ data[offset+11] = (JOCTET)(new_value & 0xFF);
+ } else {
+ data[offset+2] = 4; /* Format = unsigned long (4 octets) */
+ data[offset+3] = 0;
+ data[offset+4] = 1; /* Number Of Components = 1 */
+ data[offset+5] = 0;
+ data[offset+6] = 0;
+ data[offset+7] = 0;
+ data[offset+8] = (JOCTET)(new_value & 0xFF);
+ data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF);
+ data[offset+10] = 0;
+ data[offset+11] = 0;
+ }
+ }
+ offset += 12;
+ } while (--number_of_tags);
}
@@ -736,18 +1263,22 @@
{
/* If force-to-grayscale is requested, adjust destination parameters */
if (info->force_grayscale) {
- /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
- * properly. Among other things, the target h_samp_factor & v_samp_factor
- * will get set to 1, which typically won't match the source.
- * In fact we do this even if the source is already grayscale; that
- * provides an easy way of coercing a grayscale JPEG with funny sampling
- * factors to the customary 1,1. (Some decoders fail on other factors.)
+ /* First, ensure we have YCbCr or grayscale data, and that the source's
+ * Y channel is full resolution. (No reasonable person would make Y
+ * be less than full resolution, so actually coping with that case
+ * isn't worth extra code space. But we check it to avoid crashing.)
*/
- if ((dstinfo->jpeg_color_space == JCS_YCbCr &&
- dstinfo->num_components == 3) ||
- (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
- dstinfo->num_components == 1)) {
- /* We have to preserve the source's quantization table number. */
+ if (((dstinfo->jpeg_color_space == JCS_YCbCr &&
+ dstinfo->num_components == 3) ||
+ (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
+ dstinfo->num_components == 1)) &&
+ srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor &&
+ srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) {
+ /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
+ * properly. Among other things, it sets the target h_samp_factor &
+ * v_samp_factor to 1, which typically won't match the source.
+ * We have to preserve the source's quantization table number, however.
+ */
int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
@@ -755,50 +1286,52 @@
/* Sorry, can't do it */
ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
}
+ } else if (info->num_components == 1) {
+ /* For a single-component source, we force the destination sampling factors
+ * to 1x1, with or without force_grayscale. This is useful because some
+ * decoders choke on grayscale images with other sampling factors.
+ */
+ dstinfo->comp_info[0].h_samp_factor = 1;
+ dstinfo->comp_info[0].v_samp_factor = 1;
}
- /* Correct the destination's image dimensions etc if necessary */
+ /* Correct the destination's image dimensions as necessary
+ * for crop and rotate/flip operations.
+ */
+ dstinfo->image_width = info->output_width;
+ dstinfo->image_height = info->output_height;
+
+ /* Transpose destination image parameters */
switch (info->transform) {
- case JXFORM_NONE:
- /* Nothing to do */
- break;
- case JXFORM_FLIP_H:
- if (info->trim)
- trim_right_edge(dstinfo);
- break;
- case JXFORM_FLIP_V:
- if (info->trim)
- trim_bottom_edge(dstinfo);
- break;
case JXFORM_TRANSPOSE:
- transpose_critical_parameters(dstinfo);
- /* transpose does NOT have to trim anything */
- break;
case JXFORM_TRANSVERSE:
- transpose_critical_parameters(dstinfo);
- if (info->trim) {
- trim_right_edge(dstinfo);
- trim_bottom_edge(dstinfo);
- }
- break;
case JXFORM_ROT_90:
- transpose_critical_parameters(dstinfo);
- if (info->trim)
- trim_right_edge(dstinfo);
- break;
- case JXFORM_ROT_180:
- if (info->trim) {
- trim_right_edge(dstinfo);
- trim_bottom_edge(dstinfo);
- }
- break;
case JXFORM_ROT_270:
transpose_critical_parameters(dstinfo);
- if (info->trim)
- trim_bottom_edge(dstinfo);
break;
}
+ /* Adjust Exif properties */
+ if (srcinfo->marker_list != NULL &&
+ srcinfo->marker_list->marker == JPEG_APP0+1 &&
+ srcinfo->marker_list->data_length >= 6 &&
+ GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 &&
+ GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 &&
+ GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 &&
+ GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 &&
+ GETJOCTET(srcinfo->marker_list->data[4]) == 0 &&
+ GETJOCTET(srcinfo->marker_list->data[5]) == 0) {
+ /* Suppress output of JFIF marker */
+ dstinfo->write_JFIF_header = FALSE;
+ /* Adjust Exif image parameters */
+ if (dstinfo->image_width != srcinfo->image_width ||
+ dstinfo->image_height != srcinfo->image_height)
+ /* Align data segment to start of TIFF structure for parsing */
+ adjust_exif_parameters(srcinfo->marker_list->data + 6,
+ srcinfo->marker_list->data_length - 6,
+ dstinfo->image_width, dstinfo->image_height);
+ }
+
/* Return the appropriate output data set */
if (info->workspace_coef_arrays != NULL)
return info->workspace_coef_arrays;
@@ -816,40 +1349,108 @@
*/
GLOBAL(void)
-jtransform_execute_transformation (j_decompress_ptr srcinfo,
- j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jpeg_transform_info *info)
+jtransform_execute_transform (j_decompress_ptr srcinfo,
+ j_compress_ptr dstinfo,
+ jvirt_barray_ptr *src_coef_arrays,
+ jpeg_transform_info *info)
{
jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
+ /* Note: conditions tested here should match those in switch statement
+ * in jtransform_request_workspace()
+ */
switch (info->transform) {
case JXFORM_NONE:
+ if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+ do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
case JXFORM_FLIP_H:
- do_flip_h(srcinfo, dstinfo, src_coef_arrays);
+ if (info->y_crop_offset != 0)
+ do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
+ else
+ do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset,
+ src_coef_arrays);
break;
case JXFORM_FLIP_V:
- do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+ do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
case JXFORM_TRANSPOSE:
- do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+ do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
case JXFORM_TRANSVERSE:
- do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+ do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
case JXFORM_ROT_90:
- do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+ do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
case JXFORM_ROT_180:
- do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+ do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
case JXFORM_ROT_270:
- do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
+ do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+ src_coef_arrays, dst_coef_arrays);
break;
}
}
+/* jtransform_perfect_transform
+ *
+ * Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ *
+ * Inputs:
+ * image_width, image_height: source image dimensions.
+ * MCU_width, MCU_height: pixel dimensions of MCU.
+ * transform: transformation identifier.
+ * Parameter sources from initialized jpeg_struct
+ * (after reading source header):
+ * image_width = cinfo.image_width
+ * image_height = cinfo.image_height
+ * MCU_width = cinfo.max_h_samp_factor * DCTSIZE
+ * MCU_height = cinfo.max_v_samp_factor * DCTSIZE
+ * Result:
+ * TRUE = perfect transformation possible
+ * FALSE = perfect transformation not possible
+ * (may use custom action then)
+ */
+
+GLOBAL(boolean)
+jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height,
+ int MCU_width, int MCU_height,
+ JXFORM_CODE transform)
+{
+ boolean result = TRUE; /* initialize TRUE */
+
+ switch (transform) {
+ case JXFORM_FLIP_H:
+ case JXFORM_ROT_270:
+ if (image_width % (JDIMENSION) MCU_width)
+ result = FALSE;
+ break;
+ case JXFORM_FLIP_V:
+ case JXFORM_ROT_90:
+ if (image_height % (JDIMENSION) MCU_height)
+ result = FALSE;
+ break;
+ case JXFORM_TRANSVERSE:
+ case JXFORM_ROT_180:
+ if (image_width % (JDIMENSION) MCU_width)
+ result = FALSE;
+ if (image_height % (JDIMENSION) MCU_height)
+ result = FALSE;
+ break;
+ }
+
+ return result;
+}
+
#endif /* TRANSFORMS_SUPPORTED */
diff -u jpeg-6b/transupp.h jpeg-6b-new/transupp.h
--- jpeg-6b/transupp.h 1997-07-24 04:39:12.000000000 +0200
+++ jpeg-6b-new/transupp.h 2003-09-21 22:53:08.000000000 +0200
@@ -1,7 +1,7 @@
/*
* transupp.h
*
- * Copyright (C) 1997, Thomas G. Lane.
+ * Copyright (C) 1997-2001, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
@@ -22,32 +22,6 @@
#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */
#endif
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jtransform_request_workspace jTrRequest
-#define jtransform_adjust_parameters jTrAdjust
-#define jtransform_execute_transformation jTrExec
-#define jcopy_markers_setup jCMrkSetup
-#define jcopy_markers_execute jCMrkExec
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/*
- * Codes for supported types of image transformations.
- */
-
-typedef enum {
- JXFORM_NONE, /* no transformation */
- JXFORM_FLIP_H, /* horizontal flip */
- JXFORM_FLIP_V, /* vertical flip */
- JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */
- JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */
- JXFORM_ROT_90, /* 90-degree clockwise rotation */
- JXFORM_ROT_180, /* 180-degree rotation */
- JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */
-} JXFORM_CODE;
-
/*
* Although rotating and flipping data expressed as DCT coefficients is not
* hard, there is an asymmetry in the JPEG format specification for images
@@ -75,6 +49,19 @@
* (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
* followed by -rot 180 -trim trims both edges.)
*
+ * We also offer a lossless-crop option, which discards data outside a given
+ * image region but losslessly preserves what is inside. Like the rotate and
+ * flip transforms, lossless crop is restricted by the JPEG format: the upper
+ * left corner of the selected region must fall on an iMCU boundary. If this
+ * does not hold for the given crop parameters, we silently move the upper left
+ * corner up and/or left to make it so, simultaneously increasing the region
+ * dimensions to keep the lower right crop corner unchanged. (Thus, the
+ * output image covers at least the requested region, but may cover more.)
+ *
+ * If both crop and a rotate/flip transform are requested, the crop is applied
+ * last --- that is, the crop region is specified in terms of the destination
+ * image.
+ *
* We also offer a "force to grayscale" option, which simply discards the
* chrominance channels of a YCbCr image. This is lossless in the sense that
* the luminance channel is preserved exactly. It's not the same kind of
@@ -83,20 +70,89 @@
* be aware of the option to know how many components to work on.
*/
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jtransform_parse_crop_spec jTrParCrop
+#define jtransform_request_workspace jTrRequest
+#define jtransform_adjust_parameters jTrAdjust
+#define jtransform_execute_transform jTrExec
+#define jtransform_perfect_transform jTrPerfect
+#define jcopy_markers_setup jCMrkSetup
+#define jcopy_markers_execute jCMrkExec
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/*
+ * Codes for supported types of image transformations.
+ */
+
+typedef enum {
+ JXFORM_NONE, /* no transformation */
+ JXFORM_FLIP_H, /* horizontal flip */
+ JXFORM_FLIP_V, /* vertical flip */
+ JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */
+ JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */
+ JXFORM_ROT_90, /* 90-degree clockwise rotation */
+ JXFORM_ROT_180, /* 180-degree rotation */
+ JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */
+} JXFORM_CODE;
+
+/*
+ * Codes for crop parameters, which can individually be unspecified,
+ * positive, or negative. (Negative width or height makes no sense, though.)
+ */
+
+typedef enum {
+ JCROP_UNSET,
+ JCROP_POS,
+ JCROP_NEG
+} JCROP_CODE;
+
+/*
+ * Transform parameters struct.
+ * NB: application must not change any elements of this struct after
+ * calling jtransform_request_workspace.
+ */
+
typedef struct {
/* Options: set by caller */
JXFORM_CODE transform; /* image transform operator */
+ boolean perfect; /* if TRUE, fail if partial MCUs are requested */
boolean trim; /* if TRUE, trim partial MCUs as needed */
boolean force_grayscale; /* if TRUE, convert color image to grayscale */
+ boolean crop; /* if TRUE, crop source image */
+
+ /* Crop parameters: application need not set these unless crop is TRUE.
+ * These can be filled in by jtransform_parse_crop_spec().
+ */
+ JDIMENSION crop_width; /* Width of selected region */
+ JCROP_CODE crop_width_set;
+ JDIMENSION crop_height; /* Height of selected region */
+ JCROP_CODE crop_height_set;
+ JDIMENSION crop_xoffset; /* X offset of selected region */
+ JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */
+ JDIMENSION crop_yoffset; /* Y offset of selected region */
+ JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */
/* Internal workspace: caller should not touch these */
int num_components; /* # of components in workspace */
jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
+ JDIMENSION output_width; /* cropped destination dimensions */
+ JDIMENSION output_height;
+ JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */
+ JDIMENSION y_crop_offset;
+ int max_h_samp_factor; /* destination iMCU size */
+ int max_v_samp_factor;
} jpeg_transform_info;
#if TRANSFORMS_SUPPORTED
+/* Parse a crop specification (written in X11 geometry style) */
+EXTERN(boolean) jtransform_parse_crop_spec
+ JPP((jpeg_transform_info *info, const char *spec));
/* Request any required workspace */
EXTERN(void) jtransform_request_workspace
JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
@@ -106,10 +162,24 @@
jvirt_barray_ptr *src_coef_arrays,
jpeg_transform_info *info));
/* Execute the actual transformation, if any */
-EXTERN(void) jtransform_execute_transformation
+EXTERN(void) jtransform_execute_transform
JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
jvirt_barray_ptr *src_coef_arrays,
jpeg_transform_info *info));
+/* Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ */
+EXTERN(boolean) jtransform_perfect_transform
+ JPP((JDIMENSION image_width, JDIMENSION image_height,
+ int MCU_width, int MCU_height,
+ JXFORM_CODE transform));
+
+/* jtransform_execute_transform used to be called
+ * jtransform_execute_transformation, but some compilers complain about
+ * routine names that long. This macro is here to avoid breaking any
+ * old source code that uses the original name...
+ */
+#define jtransform_execute_transformation jtransform_execute_transform
#endif /* TRANSFORMS_SUPPORTED */