You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
538 lines
16 KiB
538 lines
16 KiB
# File generated by xf86config. |
|
# and additional hand edited by Rene Rebe - T2 Project |
|
# |
|
# YOU MUST ONLY MODIFY THE CARD SECTION AND SOME MONITOR SETTINGS |
|
# TO GET A WORKING X CONFIGURATION. |
|
# |
|
|
|
# ********************************************************************** |
|
# Refer to the XF86Config(4/5) man page for details about the format of |
|
# this file. |
|
# ********************************************************************** |
|
|
|
# ********************************************************************** |
|
# Module section -- this section is used to specify |
|
# which dynamically loadable modules to load. |
|
# ********************************************************************** |
|
|
|
Section "Module" |
|
|
|
Load "dbe" # DBE (double buffer extension) |
|
Load "ddc" # Display Data Channel extension |
|
|
|
# This loads the miscellaneous extensions module |
|
SubSection "extmod" |
|
# Option "omit xfree86-dga" # don't initialise the DGA extension |
|
# Option "omit XFree86-VidModeExtension" # disable mode-switching-supoprt |
|
EndSubSection |
|
|
|
# This loads the Type1 and FreeType font modules |
|
Load "type1" |
|
Load "freetype" |
|
|
|
# Load "glx" # GLX extension (OpenGL visuals) |
|
# Load "dri" # Direct Rendering Interface extension (OpenGL) |
|
|
|
# Load "v4l" # Video 4 Linux extension (provides a xv adapter) |
|
EndSection |
|
|
|
# ********************************************************************** |
|
# Extensions section -- this section is used to specify |
|
# which extensions to enable. |
|
# ********************************************************************** |
|
|
|
Section "Extensions" |
|
# Option "XEVIE" "Disable" |
|
# Option "Composite" "Enable" |
|
EndSection |
|
|
|
|
|
# this enabled normal users to use DRI - the Direct Rendering Extension. |
|
# it is also possible to use a group to control access. |
|
# |
|
Section "DRI" |
|
Mode 0666 |
|
EndSection |
|
|
|
# ********************************************************************** |
|
# Files section. This allows default font and rgb paths to be set |
|
# ********************************************************************** |
|
|
|
Section "Files" |
|
|
|
# The location of the RGB database. Note, this is the name of the |
|
# file minus the extension (like ".txt" or ".db"). There is normally |
|
# no need to change the default. |
|
|
|
RgbPath "/usr/X11/share/X11/rgb" |
|
|
|
# Multiple FontPath entries are allowed (which are concatenated together), |
|
# as well as specifying multiple comma-separated entries in one FontPath |
|
# command (or a combination of both methods) |
|
# |
|
# If you don't have a floating point coprocessor and emacs, Mosaic or other |
|
# programs take long to start up, try moving the Type1 and Speedo directory |
|
# to the end of this list (or comment them out). |
|
# |
|
|
|
FontPath "/usr/X11/lib/X11/fonts/75dpi/:unscaled" |
|
FontPath "/usr/X11/lib/X11/fonts/100dpi/:unscaled" |
|
FontPath "/usr/X11/lib/X11/fonts/CID/" |
|
FontPath "/usr/X11/lib/X11/fonts/PEX/" |
|
FontPath "/usr/X11/lib/X11/fonts/Speedo/" |
|
FontPath "/usr/X11/lib/X11/fonts/Type1/" |
|
FontPath "/usr/X11/lib/X11/fonts/cyrillic/" |
|
FontPath "/usr/X11/lib/X11/fonts/encodings/" |
|
FontPath "/usr/X11/lib/X11/fonts/freefont/" |
|
FontPath "/usr/X11/lib/X11/fonts/latin2/" |
|
FontPath "/usr/X11/lib/X11/fonts/local/" |
|
FontPath "/usr/X11/lib/X11/fonts/misc/" |
|
FontPath "/usr/X11/lib/X11/fonts/sharefont/" |
|
FontPath "/usr/X11/lib/X11/fonts/TTF/" |
|
|
|
# The module search path. The default path is shown here. |
|
|
|
# ModulePath "/usr/X11/lib/modules" |
|
|
|
EndSection |
|
|
|
# ********************************************************************** |
|
# Server flags section. |
|
# ********************************************************************** |
|
|
|
Section "ServerFlags" |
|
|
|
# Uncomment this to cause a core dump at the spot where a signal is |
|
# received. This may leave the console in an unusable state, but may |
|
# provide a better stack trace in the core dump to aid in debugging |
|
|
|
# Option "NoTrapSignals" |
|
|
|
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence |
|
# This allows clients to receive this key event. |
|
|
|
# Option "DontZap" |
|
|
|
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching |
|
# sequences. This allows clients to receive these key events. |
|
|
|
# Option "Dont Zoom" |
|
|
|
# Uncomment this to disable tuning with the xvidtune client. With |
|
# it the client can still run and fetch card and monitor attributes, |
|
# but it will not be allowed to change them. If it tries it will |
|
# receive a protocol error. |
|
|
|
# Option "DisableVidModeExtension" |
|
|
|
# Uncomment this to enable the use of a non-local xvidtune client. |
|
|
|
# Option "AllowNonLocalXvidtune" |
|
|
|
# Uncomment this to disable dynamically modifying the input device |
|
# (mouse and keyboard) settings. |
|
|
|
# Option "DisableModInDev" |
|
|
|
# Uncomment this to enable the use of a non-local client to |
|
# change the keyboard or mouse settings (currently only xset). |
|
|
|
# Option "AllowNonLocalModInDev" |
|
|
|
# Uncomment this to enable multi-head Xinerama support |
|
|
|
# Option "Xinerama" "true" |
|
|
|
EndSection |
|
|
|
# ********************************************************************** |
|
# Input devices |
|
# ********************************************************************** |
|
|
|
# ********************************************************************** |
|
# Core keyboard's InputDevice section |
|
# ********************************************************************** |
|
|
|
Section "InputDevice" |
|
|
|
Identifier "Keyboard1" |
|
Driver "kbd" |
|
|
|
# For most OSs the protocol can be omitted (it defaults to "Standard"). |
|
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), |
|
# uncomment the following line. |
|
|
|
# Option "Protocol" "Xqueue" |
|
|
|
Option "AutoRepeat" "250 30" |
|
|
|
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) |
|
# Option "Xleds" "1 2 3" |
|
|
|
# Option "LeftAlt" "Meta" |
|
# Option "RightAlt" "ModeShift" |
|
|
|
# To customise the XKB settings to suit your keyboard, modify the |
|
# lines below (which are the defaults). For example, for a non-U.S. |
|
# keyboard, you will probably want to use: |
|
# Option "XkbModel" "pc102" |
|
# If you have a US Microsoft Natural keyboard, you can use: |
|
# Option "XkbModel" "microsoft" |
|
# |
|
# Then to change the language, change the Layout setting. |
|
# For example, a german layout can be obtained with: |
|
# Option "XkbLayout" "de" |
|
# or: |
|
# Option "XkbLayout" "de" |
|
# Option "XkbVariant" "nodeadkeys" |
|
# |
|
# If you'd like to switch the positions of your capslock and |
|
# control keys, use: |
|
# Option "XkbOptions" "ctrl:swapcaps" |
|
|
|
# These are the default XKB settings for XFree86 |
|
# Option "XkbRules" "xorg" |
|
# Option "XkbModel" "pc101" |
|
# Option "XkbLayout" "us" |
|
# Option "XkbVariant" "" |
|
# Option "XkbOptions" "" |
|
|
|
# Option "XkbDisable" |
|
|
|
Option "XkbRules" "xorg" |
|
Option "XkbModel" "pc105" |
|
# Option "XkbLayout" "de" # german keyboard layout |
|
# Option "XkbVariant" "nodeadkeys" # normally not wanted |
|
|
|
EndSection |
|
|
|
|
|
# ********************************************************************** |
|
# Core Pointer's InputDevice section |
|
# ********************************************************************** |
|
|
|
# normal wheel mouse ... |
|
# |
|
Section "InputDevice" |
|
|
|
Identifier "Mouse1" |
|
Driver "mouse" |
|
|
|
Option "Protocol" "IMPS/2" |
|
Option "Device" "/dev/input/mice" |
|
|
|
# Option "Protocol" "Auto" |
|
# Option "Protocol" "Microsoft" |
|
# Option "Protocol" "PS/2" |
|
# Option "Device" "/dev/tts/0" |
|
# Option "Device" "/dev/misc/psaux" |
|
|
|
Option "Buttons" "5" |
|
Option "ZaxisMapping" "4 5" |
|
|
|
EndSection |
|
|
|
|
|
# ********************************************************************** |
|
# Other input device sections |
|
# this is optional and is required only if you |
|
# are using extended input devices. This is for example only. Refer |
|
# to the XF86Config man page for a description of the options. |
|
# ********************************************************************** |
|
# |
|
# Section "InputDevice" |
|
# Identifier "Mouse2" |
|
# Driver "mouse" |
|
# Option "Protocol" "MouseMan" |
|
# Option "Device" "/dev/mouse2" |
|
# EndSection |
|
# |
|
# Section "InputDevice" |
|
# Identifier "Spaceball" |
|
# Driver "magellan" |
|
# Option "Device" "/dev/cua0" |
|
# EndSection |
|
# |
|
# Section "InputDevice" |
|
# Identifier "Spaceball2" |
|
# Driver "spaceorb" |
|
# Option "Device" "/dev/cua0" |
|
# EndSection |
|
# |
|
# Section "InputDevice" |
|
# Identifier "Touchpad" |
|
# Driver "synaptics" |
|
# Option "SendCoreEvents" "true" |
|
# Option "Device" "/dev/input/mouse0" |
|
# Option "Protocol" "auto-dev" |
|
# Option "LeftEdge" "0" |
|
# Option "RightEdge" "850" |
|
# Option "TopEdge" "0" |
|
# Option "BottomEdge" "645" |
|
# Option "MinSpeed" "0.25" |
|
# Option "MaxSpeed" "1.5" |
|
# Option "AccelFactor" "0.1" |
|
# Option "FingerLow" "0" |
|
# Option "FingerHigh" "30" |
|
# Option "MaxTapMove" "20" |
|
# Option "MaxTapTime" "100A" |
|
# Option "VertEdgeScroll" "0" |
|
# Option "HorizEdgeScroll" "0" |
|
# Option "VertTwoFingerScroll" "1" |
|
# Option "HorizTwoFingerScroll" "0" |
|
# Option "HorizScrollDelta" "0" |
|
# Option "VertScrollDelta" "30" |
|
# Option "SHMConfig" "on" |
|
# Option "TapButton1" "1" |
|
# Option "TapButton2" "3" |
|
# Option "TapButton3" "2" |
|
# EndSection |
|
# |
|
# Section "InputDevice" |
|
# Identifier "Touchscreen0" |
|
# Driver "microtouch" |
|
# Option "Device" "/dev/ttyS0" |
|
# Option "MinX" "1412" |
|
# Option "MaxX" "15184" |
|
# Option "MinY" "15372" |
|
# Option "MaxY" "1230" |
|
# Option "ScreenNumber" "0" |
|
# Option "ReportingMode" "Scaled" |
|
# Option "ButtonNumber" "1" |
|
# Option "SendCoreEvents" |
|
# EndSection |
|
# |
|
# Section "InputDevice" |
|
# Identifier "Touchscreen1" |
|
# Driver "elo2300" |
|
# Option "Device" "/dev/ttyS0" |
|
# Option "MinX" "231" |
|
# Option "MaxX" "3868" |
|
# Option "MinY" "3858" |
|
# Option "MaxY" "272" |
|
# Option "ScreenNumber" "0" |
|
# Option "ReportingMode" "Scaled" |
|
# Option "ButtonThreshold" "17" |
|
# Option "ButtonNumber" "1" |
|
# Option "SendCoreEvents" |
|
# EndSection |
|
|
|
# Section "InputDevice" |
|
# Identifier "Tablet1" |
|
# Driver "summa" |
|
# Option "Device" "/dev/ttyS0" |
|
# Option "MinX" "231" |
|
# Option "MaxX" "3868" |
|
# Option "MinY" "3858" |
|
# Option "MaxY" "272" |
|
# Option "ScreenNumber" "0" |
|
# Option "ReportingMode" "Scaled" |
|
# Option "ButtonThreshold" "17" |
|
# Option "ButtonNumber" "1" |
|
# Option "SendCoreEvents" |
|
# Option "BaudRate" "19200" |
|
# Option "DataBits" "8" |
|
# Option "StopBits" "1" |
|
# Option "Parity" "Odd" |
|
# Option "FlowControl" "Xoff" |
|
# Option "VTime" "10" |
|
# Option "VMin" "1" |
|
# EndSection |
|
|
|
|
|
# ********************************************************************** |
|
# Monitor section |
|
# ********************************************************************** |
|
|
|
# Any number of monitor sections may be present |
|
|
|
Section "Monitor" |
|
|
|
Identifier "Monitor1" |
|
|
|
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S |
|
# USER MANUAL FOR THE CORRECT NUMBERS !! |
|
|
|
# normally uncomment this lines |
|
# HorizSync 24.0 - 80.0 |
|
# VertRefresh 50-100 |
|
|
|
# overwrite the screen dimensions (in mm) e.g. to get another virtual dpi |
|
# value |
|
# DisplaySize 345 260 |
|
|
|
# HorizSync is in kHz unless units are specified. |
|
# HorizSync may be a comma separated list of discrete values, or a |
|
# comma separated list of ranges of values. |
|
# HorizSync 30-64 # multisync |
|
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies |
|
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies |
|
|
|
# VertRefresh is in Hz unless units are specified. |
|
# VertRefresh may be a comma separated list of discrete values, or a |
|
# comma separated list of ranges of values. |
|
# VertRefresh 50-100 |
|
|
|
# some mode examples 1,2 selfmade - 3 from fbset |
|
# (only needed for low-level tricks, exotic Laptops or other LCD's) |
|
# |
|
# Mode "1152x900" |
|
# DotClock 120 |
|
# HTimings 1152 1200 1312 1528 |
|
# VTimings 900 910 946 985 |
|
# EndMode |
|
# Mode "1152x900-2" |
|
# DotClock 100 |
|
# HTimings 1152 1200 1312 1528 |
|
# VTimings 900 910 946 985 |
|
# EndMode |
|
# Mode "1152x864" |
|
# DotClock 105.810 |
|
# HTimings 1152 1184 1312 1504 |
|
# VTimings 864 868 872 902 |
|
# Flags "-HSync" "-VSync" |
|
# EndMode |
|
|
|
# for framebuffer devices you might want to simply add |
|
# the 'fbset -x' output here. |
|
|
|
EndSection |
|
|
|
|
|
# ********************************************************************** |
|
# Graphics device section |
|
# ********************************************************************** |
|
|
|
# Any number of graphics device sections may be present |
|
|
|
Section "Device" |
|
Identifier "Card1" |
|
|
|
# Use this for framebuffer devices - should work on most systems. |
|
Driver "fbdev" |
|
Option "fbdev" "/dev/fb/0" |
|
|
|
# Driver "vga" # mga, ati, nv, sis, vesa ... |
|
# # Option "BackingStore" |
|
|
|
# # Some driver accept an UseFBDev option (e.g. radeon) to switch the |
|
# # mode via the Linux framebuffer layer. Needed e.g. as workaround for |
|
# # iBooks. |
|
# # Option "UseFBDev" |
|
|
|
# # The BuID is only required for multi-monitor configs or some fbdev drivers |
|
# # BusID "PCI:1:5:0" |
|
# # Screen 0 # Screen of a dual-head mga card |
|
|
|
# # Option "NoHal" # do not use the binary-only Matrox HAL library |
|
# # Option "AGPMode2x" |
|
|
|
# # Option "MergedFB" "true" # lightweight multi-head |
|
# # Option "CRT2Position" "RightOf" |
|
|
|
EndSection |
|
|
|
# Matrox Millenium 4xx, Ati or NVidia second-head |
|
#Section "Device" |
|
# Identifier "Card2" |
|
# Driver "mga" # or other dual-able cards like ati, nv |
|
# # Option "BackingStore" |
|
|
|
# BusID "PCI:1:5:0" |
|
# Screen 1 |
|
# |
|
# # Option "NoHal" # do not use the binary-only Matrox HAL library |
|
# # Option "AGPMode2x" |
|
|
|
# # Option "Tv" "yes" |
|
# # Option "TVStandard" "PAL" |
|
# # Option "CableType" "SCART_COMPOSITE" |
|
#EndSection |
|
|
|
# ********************************************************************** |
|
# Screen sections |
|
# ********************************************************************** |
|
|
|
# Any number of screen sections may be present. Each describes |
|
# the configuration of a single screen. A single specific screen section |
|
# may be specified from the X server command line with the "-screen" |
|
# option. |
|
Section "Screen" |
|
Identifier "Screen1" |
|
Device "Card1" |
|
Monitor "Monitor1" |
|
DefaultDepth 24 |
|
|
|
Subsection "Display" |
|
Modes "1024x768" "800x600" "640x480" |
|
EndSubsection |
|
EndSection |
|
|
|
#Section "Screen" |
|
# Identifier "Screen2" |
|
# Device "Card2" |
|
# Monitor "Monitor1" |
|
# DefaultDepth 16 |
|
# |
|
# Subsection "Display" |
|
# Modes "1024x768" "800x600" "640x480" |
|
# EndSubsection |
|
#EndSection |
|
|
|
#Section "Screen" |
|
# Identifier "ScreenTV" |
|
# Device "CardTV" |
|
# Monitor "Monitor1" |
|
# DefaultDepth 16 |
|
# |
|
# Subsection "Display" |
|
# Depth 16 |
|
# Modes "640x480" |
|
# ViewPort 0 0 |
|
# EndSubsection |
|
#EndSection |
|
|
|
|
|
# ********************************************************************** |
|
# ServerLayout sections. |
|
# ********************************************************************** |
|
|
|
# Any number of ServerLayout sections may be present. Each describes |
|
# the way multiple screens are organised. A specific ServerLayout |
|
# section may be specified from the X server command line with the |
|
# "-layout" option. In the absence of this, the first section is used. |
|
# When now ServerLayout section is present, the first Screen section |
|
# is used alone. |
|
|
|
Section "ServerLayout" |
|
|
|
# The Identifier line must be present |
|
Identifier "Simple Layout" |
|
|
|
# Each Screen line specifies a Screen section name, and optionally |
|
# the relative position of other screens. The four names after |
|
# primary screen name are the screens to the top, bottom, left and right |
|
# of the primary screen. In this example, screen 2 is located to the |
|
# right of screen 1. |
|
|
|
Screen "Screen1" # LeftOf "Screen2" |
|
# Screen "Screen2" |
|
# Screen "ScreenTV" |
|
|
|
# Each InputDevice line specifies an InputDevice section name and |
|
# optionally some options to specify the way the device is to be |
|
# used. Those options include "CorePointer", "CoreKeyboard" and |
|
# "SendCoreEvents". |
|
|
|
InputDevice "Mouse1" "CorePointer" |
|
InputDevice "Keyboard1" "CoreKeyboard" |
|
|
|
# It is possible to specify secondary input devices which might not |
|
# be pressend on X startup. Nice for laptops with temporary external |
|
# mices ;-)! |
|
|
|
# InputDevice "Mouse2" "SendCoreEvents" |
|
# InputDevice "Tablet1" |
|
|
|
EndSection |
|
|
|
|