package-update/base/binutils/0002_binutils-texinfo-5.0-gas-doc.patch

# --- SDE-COPYRIGHT-NOTE-BEGIN ---
# This copyright note is auto-generated by ./scripts/Create-CopyPatch.
#
# Filename: package/.../binutils/0002_binutils-texinfo-5.0-gas-doc.patch
# Copyright (C) 2014 The OpenSDE Project
#
# More information can be found in the files COPYING and README.
#
# This patch file is dual-licensed. It is available under the license the
# patched project is licensed under, as long as it is an OpenSource license
# as defined at http://www.opensource.org/ (e.g. BSD, X11) or under the terms
# of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
# --- SDE-COPYRIGHT-NOTE-END ---

taken from https://raw.githubusercontent.com/jck/pkgbuilds/master/binutils-msp430/0002_binutils-texinfo-5.0-gas-doc.patch

diff --git c/gas/doc/c-arc.texi i/gas/doc/c-arc.texi
index 3a136a7..cd6f0d9 100644
--- c/gas/doc/c-arc.texi
+++ i/gas/doc/c-arc.texi
@@ -212,7 +212,7 @@ The extension instructions are not macros.  The assembler creates
 encodings for use of these instructions according to the specification
 by the user.  The parameters are:
 
-@table @bullet
+@table @code
 @item @var{name}
 Name of the extension instruction 
 
diff --git c/gas/doc/c-arm.texi i/gas/doc/c-arm.texi
index d3cccf4..97c2f92 100644
--- c/gas/doc/c-arm.texi
+++ i/gas/doc/c-arm.texi
@@ -376,29 +376,29 @@ ARM and THUMB instructions had their own, separate syntaxes.  The new,
 @code{unified} syntax, which can be selected via the @code{.syntax}
 directive, and has the following main features:
 
-@table @bullet
-@item
+@table @code
+@item 1
 Immediate operands do not require a @code{#} prefix.
 
-@item
+@item 2
 The @code{IT} instruction may appear, and if it does it is validated
 against subsequent conditional affixes.  In ARM mode it does not
 generate machine code, in THUMB mode it does.
 
-@item
+@item 3
 For ARM instructions the conditional affixes always appear at the end
 of the instruction.  For THUMB instructions conditional affixes can be
 used, but only inside the scope of an @code{IT} instruction.
 
-@item
+@item 4
 All of the instructions new to the V6T2 architecture (and later) are
 available.  (Only a few such instructions can be written in the
 @code{divided} syntax).
 
-@item
+@item 5
 The @code{.N} and @code{.W} suffixes are recognized and honored.
 
-@item
+@item 6
 All instructions set the flags if and only if they have an @code{s}
 affix.
 @end table
@@ -433,28 +433,6 @@ Either @samp{#} or @samp{$} can be used to indicate immediate operands.
 @cindex register names, ARM
 *TODO* Explain about ARM register naming, and the predefined names.
 
-@node ARM-Neon-Alignment
-@subsection NEON Alignment Specifiers
-
-@cindex alignment for NEON instructions
-Some NEON load/store instructions allow an optional address
-alignment qualifier.
-The ARM documentation specifies that this is indicated by
-@samp{@@ @var{align}}. However GAS already interprets
-the @samp{@@} character as a "line comment" start,
-so @samp{: @var{align}} is used instead.  For example:
-
-@smallexample
-        vld1.8 @{q0@}, [r0, :128]
-@end smallexample
-
-@node ARM Floating Point
-@section Floating Point
-
-@cindex floating point, ARM (@sc{ieee})
-@cindex ARM floating point (@sc{ieee})
-The ARM family uses @sc{ieee} floating-point numbers.
-
 @node ARM-Relocations
 @subsection ARM relocation generation
 
@@ -497,6 +475,28 @@ respectively.  For example to load the 32-bit address of foo into r0:
         MOVT r0, #:upper16:foo
 @end smallexample
 
+@node ARM-Neon-Alignment
+@subsection NEON Alignment Specifiers
+
+@cindex alignment for NEON instructions
+Some NEON load/store instructions allow an optional address
+alignment qualifier.
+The ARM documentation specifies that this is indicated by
+@samp{@@ @var{align}}. However GAS already interprets
+the @samp{@@} character as a "line comment" start,
+so @samp{: @var{align}} is used instead.  For example:
+
+@smallexample
+        vld1.8 @{q0@}, [r0, :128]
+@end smallexample
+
+@node ARM Floating Point
+@section Floating Point
+
+@cindex floating point, ARM (@sc{ieee})
+@cindex ARM floating point (@sc{ieee})
+The ARM family uses @sc{ieee} floating-point numbers.
+
 @node ARM Directives
 @section ARM Machine Directives
 
diff --git c/gas/doc/c-cr16.texi i/gas/doc/c-cr16.texi
index b6cf10f..00ddae2 100644
--- c/gas/doc/c-cr16.texi
+++ i/gas/doc/c-cr16.texi
@@ -43,26 +43,33 @@ Operand expression type qualifier is an optional field in the instruction operan
 CR16 target operand qualifiers and its size (in bits):
 
 @table @samp
-@item Immediate Operand
-- s ---- 4 bits
-@item 
-- m ---- 16 bits, for movb and movw instructions.
-@item 
-- m ---- 20 bits, movd instructions.
-@item 
-- l ---- 32 bits
-
-@item Absolute Operand
-- s ---- Illegal specifier for this operand.
-@item  
-- m ---- 20 bits, movd instructions.
-
-@item Displacement Operand
-- s ---- 8 bits
-@item
-- m ---- 16 bits
-@item 
-- l ---- 24 bits
+@item Immediate Operand: s
+4 bits.
+
+@item Immediate Operand: m
+16 bits, for movb and movw instructions.
+
+@item Immediate Operand: m
+20 bits, movd instructions.
+
+@item Immediate Operand: l
+32 bits.
+
+@item Absolute Operand: s
+Illegal specifier for this operand.
+
+@item Absolute Operand: m
+20 bits, movd instructions.
+
+@item Displacement Operand: s
+8 bits.
+
+@item Displacement Operand: m
+16 bits.
+
+@item Displacement Operand: l
+24 bits
+
 @end table
 
 For example:
diff --git c/gas/doc/c-mips.texi i/gas/doc/c-mips.texi
index 715091e..1250c1e 100644
--- c/gas/doc/c-mips.texi
+++ i/gas/doc/c-mips.texi
@@ -220,7 +220,7 @@ the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
 instructions around accesses to the @samp{HI} and @samp{LO} registers.
 @samp{-no-m4650} turns off this option.
 
-@itemx -m3900
+@item -m3900
 @itemx -no-m3900
 @itemx -m4100
 @itemx -no-m4100
diff --git c/gas/doc/c-score.texi i/gas/doc/c-score.texi
index 0820115..a5b570f 100644
--- c/gas/doc/c-score.texi
+++ i/gas/doc/c-score.texi
@@ -36,7 +36,7 @@ implicitly with the @code{gp} register. The default value is 8.
 @item -EB
 Assemble code for a big-endian cpu
 
-@itemx -EL
+@item -EL
 Assemble code for a little-endian cpu
 
 @item -FIXDD 
@@ -48,13 +48,13 @@ Assemble code for no warning message for fix data dependency
 @item -SCORE5
 Assemble code for target is SCORE5
 
-@itemx -SCORE5U
+@item -SCORE5U
 Assemble code for target is SCORE5U
 
-@itemx -SCORE7
+@item -SCORE7
 Assemble code for target is SCORE7, this is default setting
 
-@itemx -SCORE3
+@item -SCORE3
 Assemble code for target is SCORE3
 
 @item -march=score7
diff --git c/gas/doc/c-tic54x.texi i/gas/doc/c-tic54x.texi
index 4cfb440..9d631a6 100644
--- c/gas/doc/c-tic54x.texi
+++ i/gas/doc/c-tic54x.texi
@@ -108,7 +108,7 @@ In this example, x is replaced with SYM2; SYM2 is replaced with SYM1, and SYM1
 is replaced with x.  At this point, x has already been encountered
 and the substitution stops.
 
-@smallexample @code
+@smallexample
  .asg   "x",SYM1 
  .asg   "SYM1",SYM2
  .asg   "SYM2",x
@@ -125,14 +125,14 @@ Substitution may be forced in situations where replacement might be
 ambiguous by placing colons on either side of the subsym.  The following
 code: 
 
-@smallexample @code
+@smallexample
  .eval  "10",x
 LAB:X:  add     #x, a
 @end smallexample
 
 When assembled becomes:
 
-@smallexample @code
+@smallexample
 LAB10  add     #10, a
 @end smallexample
 
@@ -308,7 +308,7 @@ The @code{LDX} pseudo-op is provided for loading the extended addressing bits
 of a label or address.  For example, if an address @code{_label} resides
 in extended program memory, the value of @code{_label} may be loaded as
 follows:
-@smallexample @code
+@smallexample
  ldx     #_label,16,a    ; loads extended bits of _label
  or      #_label,a       ; loads lower 16 bits of _label
  bacc    a               ; full address is in accumulator A
@@ -344,7 +344,7 @@ Assign @var{name} the string @var{string}.  String replacement is
 performed on @var{string} before assignment.
 
 @cindex @code{eval} directive, TIC54X
-@itemx .eval @var{string}, @var{name}
+@item .eval @var{string}, @var{name}
 Evaluate the contents of string @var{string} and assign the result as a
 string to the subsym @var{name}.  String replacement is performed on
 @var{string} before assignment.